Is the pedestrian working safely around the forklift?
Use pedestrian walkways, or stay to one side of the equipment aisle. Never ride on a forklift, unless authorized and the forklift is designed for riders. Never pass under an elevated load.
When a pedestrian encounters a forklift the right of way goes to?
OSHA states the pedestrian has the right of way; therefore, operators must be on constant alert. The forklift operator is required to slow down and sound their horn at doorways, intersections, blind spots and when entering or exiting a building.
How far should a pedestrian be from a forklift?
4 ft.
Ideally, you should keep a forklift as far away from pedestrians as possible. In areas where pedestrians are present, a minimum distance of 4 ft. is necessary.
What is the pedestrian exclusion zone around a forklift?
Designate exclusion zones for pedestrians and forklifts. Pedestrian exclusion zones should be enforced within a three metre radius of a forklift. This distance should expand when the height of the forklift load or the speed travelled increases.
How can you be safe around a forklift?
Train pedestrians.
- Keep a safe distance from forklifts.
- Never walk near or under raised forks.
- Exercise extreme caution at blind corners, doorways or other trouble spots.
- Make eye contact with operators.
- If a forklift driver is performing a lift nearby, wait for it to be completed before passing.
Where is the danger zone on a forklift?
The Red Zone puts a bright red line on the floor, near the forklift, to show pedestrians where they are not allowed. This zone can also be called the SAFETY HALO zone and can be adjusted to the distance of your choice.
What is the minimum distance that the pedestrian and the forklift driver must maintain eye contact?
For most small forklifts and reach trucks, a little over 9-feet (3 meter) of space should be the minimum distance between lifts and pedestrians. One of the most hazardous occurrences in a warehouse are forklift-pedestrian encounters.
What is forklift safety?
Forklift safety refers to the safe management of operations of forklifts for protecting operators and other employees working in the vicinity. This is done by following standard operation procedures, minimizing hazards, risks and accidents directly or indirectly related to forklift operations.
What is the minimum walkway width?
A minimum width of 18 inches is acceptable for a walkway used for maintenance and gaining access to equipment and would comply with the intent of Section 1910.37, OSHA General Industry Standards.