How do you set a dixell thermostat?
To Check Temperature Setting: Press and hold in the set button for 5 seconds to see the temperature setting. To adjust the temperature setting use the up or down arrow.
How do you reset a dixell?
Resetting the Temperatures
- With either the maximum or minimum temperature displayed, press and hold the SET button for more than three seconds. The “rSt” message will display on the screen.
- The controller confirms the reset by having the “rSt” blink. After this, the normal temperature will display on the screen.
What does P1 mean on dixell controller?
What does it mean? – This indicates a thermostat probe failure. “P1” displays on units with Dixell electronic controls.
What is a dixell controller?
The Dixell X-Freeze is a microprocessor based controller, suitable for applications on medium or low temperature ventilated refrigerating units with 32 x 74 x 60 mm format. It has three relay outputs to control compressor, fan, and defrost which can be either electrical or reverse cycle (hot gas).
How do you reset a polar fridge?
You can do a soft reset by pressing and holding the UP, DOWN, BACK and LIGHT buttons simultaneously for five seconds until the Polar animation is shown on the display.
What is P1 error?
The P1 error code indicates an abnormal increase or decrease in voltage. Check the cables in your air conditioning unit to ensure that the wires are not crossed or improperly connected. If the wires are properly connected, then check the power supply to ensure that the correct amount of voltage is going to the unit.
What is P1 freezer?
On page 10, it says P1 code means the bottom tray is full [as in full of water] and the solution is to “Carefully move the unit to a drain location, remove the bottom drain plug and let the water drain away. Restart the machine until the ‘P1’ symbol disappears.
How do I set the temperature on my fridge?
On every fridge the rules for the coldest settings are always the following: The numbers on the fridge’s temperature dial indicate refrigerant power. The higher the number goes the colder the fridge will maintain. Setting it to 5 will make your fridge the coldest.
How do you set the temperature on a digital refrigerator?
To set your refrigerator temperature on a digital refrigerator, use the arrow or number keys on the digital keypad to set the temperature between 35 to 38 degrees F. If your refrigerator has a dial or slide mechanism, start by checking the current temperature using an appliance thermometer.