How do I access my Dlink 320 DNS?
Open a web browser and enter the IP address of the D-Link DNS-320L to access the Web UI. If you have a DHCP-enabled router on your network, you may need to check the DHCP table to see what IP address the DNS-320L was assigned.
What is D-Link DNS-320?
The DNS-320L ShareCenter 2-Bay Cloud Network Storage Enclosure is an easy-to-use solution for accessing, sharing, and backing up your important data by creating your own personal cloud. Share Your Files from Anywhere.
How do I access my Dlink NAS?
Connect to the D-Link NAS device using its IP address in a web browser. Enter username and password. Select Configuration….Under Network Access Settings:
- Select type ‘SMB’.
- Select category ‘User’.
- Check all accounts.
- Browse and select the folder that will be shared.
What is a Dlink ShareCenter?
The ShareCenter™ 2-Bay Network Storage, when used with internal SATA drives*, enables homes and offices to share documents, music, photos, and videos across the network and on the Internet, so family members, friends, or employees can easily access them.
How do I reset my DNS 320?
To factory reset the DNS-320L locate the small hole on the bottom of the machine marked “reset”. After the DNS-320L has been powered on for at least one minute insert an unfolded paper clip or tiny screw driver in the hole. Push gently until you feel a click and then hold for 10 seconds. Then release the button.
How do I connect to DNS-323?
The simplest way to access your DNS-323 is to use theEasy Search Utility provided on the CD-ROM. Thiswill automatically detect any DNS-323 devices on your network,allow you to set up network drives in Windows, perform basicconfiguration and access the web configuration interface.
How do I reset my Dlink Share Center?
To hard reset your NAS Storage device, you can reset the NAS by press the RESET button or use the reset function in NAS web interface.
- Make sure the NAS is well connected to the internet.
- Use an unfolded paperclip to press and hold the RESET button for at least 20 seconds and wait until the LED turn green.
What is Dlink sharecenter dns-320 setup wizard?
D-Link ShareCenter DNS-320 Setup Wizard 1.0.3.0. D-Link’s DNS-320 2-Bay Network Storage device allows you to back up and share your digital files over the network without breaking the bank. Enjoy the flexibility of using your own SATA disk drives.
How to configure D-Link sharecenter pulse?
D-Link ShareCenter Pulse User Manual Page 18 Wizard Page The storage device has a setup Wizard that allows you to quickly configure some of the basic device settings. Click on the ‘Run Wizard’ button to start the setup wizard quick configuration. In this window the user will be informed about the steps that will follow in this configuration.
What DNS addresses do I need for the sharecenter pulse?
Most D-Link routers have a default LAN IP address of 192.168.0.1. Specify the first and second DNS Addresses for the ShareCenter Pulse. A DNS Address will allow the ShareCenter Pulse to resolve names into IP addresses. Example: Without a DNS address, the ShareCenter Pulse would not be able to contact an FTP site such as ftp.dlink.com (name).
How do I sign up for D-Link’s free DDNS?
When the user clicks on the ‘Sign up for D-Link’s Free DDNS service at www.DLinkDDNS.com’ link, the user will be re-directed to the D-Link DDNS page. Here the user can create or modify a D-Link DDNS account to use in this configuration. D-Link ShareCenter Pulse User Manual Page 72 Disk Diagnostic Page