Will 11-Speed SRAM cassette fit on a Shimano hub?
Yes, SRAM NX cassettes (e.g. PG-1130) will work on Shimano freehubs. It’s the cheap end of the market and quite heavy. An XT 11-42 would be a little lighter.
Can I use a SRAM cassette on a Shimano hub?
Buyers are free to use a SRAM chain and cassette with their Shimano groupset, and vice versa, just as a SRAM chain can be paired with a Shimano cassette, and vice versa. SRAM’s cassettes and chains are compatible with all of Shimano’s groupsets, and vice versa.
Will my hub fit an 11-speed cassette?
If you are fitting an 11sp shimano mtb cassette then yes it will work. It’s only 11sp road cassettes and sram 11sp (read up on XD drivers) that are different. You should also find a small spacer behind the 10 speed cassette when you take it off.
Do SunRace cassettes fit Shimano hubs?
SRAM, SunRace, IRD: mostly compatible Most cassette hubs are compatible with Shimano cassette cogs. SRAM cassettes and most Miche, IRD and SunRace cassettes use the same inter-sprocket spacing as Shimano, but at least some SRAM 10-speed cassettes do not fit aluminum-body Dura-Ace hubs.
Can I put a 11 speed cassette on a 12 speed hub?
The 12-speed cassette is designed to be backwards compatible with the existing 11-speed road freehub, while the 12 speed-specific freehub (available on Dura Ace hubs currently) can’t be used with the 11-speed parts. Sram HG-style cassettes are largely the same spacing as Shimano, with the 10 speed exception.
Can you use 10-speed cassette on 11-speed hub?
It will shift fine with a Shimano or SRAM 11-speed system. And in case any of you were wondering, if you have a 10-speed Shimano or SRAM system and buy a wheelset now, you can still run 10-speed cogs on that wheel. To put a 10-speed cogset on an 11-speed freehub, you just put a spacer behind the largest cog.
Can I put 11 speed cassette on 10 speed hub?
These cassettes are pre-machined and will fit directly onto 10 speed freehub bodies and are available in 11-25, 11-28, and 11-32t. However, if you already have an 11 speed cassette that you wish would fit other wheels*, Lasco Concept will machine it for you.
Can you use 10 speed cassette on 11 speed hub?
Are Shimano and SRAM cassettes interchangeable?
Compatibility between different drivetrains SRAM and Shimano cassettes, on either road or mountain bike, are interchangeable with each other as the spacing is the same between the sprockets.
Can you run a Shimano 11-speed cassette with a SRAM 11-speed derailleur?
Just wondering if anyone has any experience running a Shimano 11-speed cassette with a SRAM 11-speed derailleur? Road or MTB? Sorry, should have said that! No problem, rode a MTB on Sunday with XTR 11 speed shifter, rear mech and new single ring chainset with SRAM 11 speed cassette with 42 tooth large rear cog.
Can I use SRAM hubs with Shimano cassettes?
Shimano has also not made Micro Spline and open standard, which means that if your hub could work with Micro Spline, the hub manufacturer might not be able to make one. If it’s not possible to get the freehub body for your hub that fits the cassette that you want, it is possible to play mix and match between SRAM and Shimano 12-speed cassettes.
Can you fit an 11-speed cassette on a normal Hg freehub body?
If you are fitting a Shimano or Shimano compatible 11-speed cassette, then a normal HG body is fine. If you are fitting a SRAM 11-speed cassette, then things are a bit trickier. Higher-end SRAM 11-speed drivetrains use a special XD freehub but the more affordable SRAM 11-speed groups use a normal HG freehub body.
Are SRAM XD and Shimano Carrera hubs interchangeable?
Normally they are interchangevle’ but if your 11 speed cassette needs an XD hub (smallest sprocket smaller than 11t) then it won’t fit and as far as I’m aware Shimano don’t make a freehub to take a SRAM specific part (funny that). The Carrera Hardtail combined thread – come on all you Carrera’s!