What is the diameter of a 6 32 bolt?
External Thread Screw Threads Size Chart
Screw Size | Class Thread | Major Diameter |
---|---|---|
6-32 | 2A | 0.1312 |
6-32 | 3A | 0.1320 |
6-40 | 2A | 0.1321 |
6-40 | 3A | 0.1329 |
What diameter is 8-32 screw?
Thread Diameter: 0.164 Inch (#8 Size); Head Diameter: 0.322 Inch; Head Height: 0.115 Inch; Phillips Drive Size #2. Threads per Inch: 32; Thread Type: Coarse Standard.
What diameter is #6 32?
The 6 32 screw is the screws with #6 that is 0.1380 \ 3.5052 external thread diameter and a uniform diameter the entire length of the shaft as opposed to tapered screws which have a pointed tip.
What does 6/32 mean on a bolt?
Screws have three basic measurements: gauge, threads per inch, and shaft length in inches. So, you may also see a measurement like 6-32 x 1 1/2″. This means it’s a #6 diameter, with 32 threads per inch (almost double the normal thread count as a standard wood screw) and an inch and a half long.
What thread size is 6-32?
0.138
UNC – Unified Coarse Threads
Major Diameter (in) | Threads per inch (tpi) | Major Diameter |
---|---|---|
(in) | ||
#6 – 32 | 32 | 0.138 |
#8 – 32 | 32 | 0.164 |
#10 – 24 | 24 | 0.190 |
What is the diameter of 8-32 Unc?
0.164 4.166
UNC Thread ANSI/ASME B1. 1
Nominal Diameter | Major Diameter Inch | Major Diameter mm |
---|---|---|
#6 – 32 UNC | 0.138 | 3.505 |
#8 – 32 UNC | 0.164 | 4.166 |
#10 – 24 UNC | 0.190 | 4.826 |
#12 – 24 UNC | 0.216 | 5.486 |
What size is a 8-32 nut?
#8-32 Zinc Finish Steel Machine Screw Nut
System of Measurement | Imperial (Inch) |
---|---|
Wrench Size | 11/32″ |
Material | Steel |
Dia/Thread Size | #8-32 |
Thickness | 0.125″ |
What does NC stand for in bolts?
National Coarse Thread
Common Fastener Related Abbreviations
Abbreviation | Meaning |
---|---|
NC | National Coarse Thread |
NF | National Fine Thread |
NT | Nut |
OH | Oval Head |
Is M4 the same as 6-32?
Why EK isn’t going by metric sizes seems a bit weird to me. The tap drill size for M4 is 3.3 mm and 2.85 mm for UNC 6-32. The major diameter (thread size) for UNC 6-32 is 3.505 mm (according to the Maryland Metrics Thread Data Charts).
Are #6 and M6 the same?
M6 threads are 6mm metric screws. The standard metric rack screw is called M6 x 1. The ‘M’ means it’s metric. The ‘6’ is the outside diameter measured in millimeters, and the ‘1’ is the distance between adjacent threads, also in millimeters.
Is 6 32 UNC or UNF?
UNF – Unified National Fine Threads
Major Diameter (in) | Threads per inch (tpi) | Pitch (mm) |
---|---|---|
#6 – 40 | 40 | 0.635 |
#8 – 36 | 36 | 0.705 |
#10 – 32 | 32 | 0.794 |