What is MJE13009?
MJE13009 is a semiconductor device made of silicon material that falls under the category of NPN transistors. This device is mainly used for switching and amplification purposes. The power dissipation of this device is 100W and the emitter-base voltage is 9V which is the amount of voltage needed to bias the device.
What is a PN2222 transistor used for?
The PN2222 is a conjoint NPN bipolar junction transistor which is used for common persistence less power intensifying or swapping circuits applications. It is intended for low to intermediate current, squat power, intermediate voltage and can activate at a temperately higher speed.
What is the function of TIP122 transistor?
The TIP122 is a Darlington pair NPN transistor. It functions like a normal NPN transistor, but since it has a Darlington pair inside it has a good collector current rating of about 5A and a gain of about 1000. It can also withstand about 100V across its collector- Emitter hence can be used to drive heavy loads.
How does a transister work?
The transistor works as an open switch. As a consequence, the output voltage is equal to the voltage source Vcc. Injecting enough current into the base, a current flows from Vcc to the ground and the output voltage is the same as the ground, i.e., the transistor works as a closed switch.
What is VBE on in transistor Datasheet?
For a BJT as you say if VBE < VBE(ON) the transistor is in cut-off, when you get to VBE = VBE(ON) the base and the emiter of the transistor behave like a diode, with the voltage drop of a diode (0.6-0.7V) it means you “can’t” have more than VBE = VBE(ON), you only can have the voltage drop across the diode.
How do you test a 122 tip?
Connect the base terminal of the transistor to the terminal marked positive (usually coloured red) on the multimeter. Connect the terminal marked negative or common (usually coloured black) to the collector and measure the resistance. It should read open circuit (there should be a deflection for a PNP transistor).
What is VBE of BJT?
VBE is the voltage that falls between the base and emitter of a bipolar junction transistor. VBE is approximately 0.7V for a silicon transistor.
What are the applications of mje13009 NPN high power transistor?
They are particularly suited for 115 and 220 V switch mode applications such as Switching Regulators, Inverters, Motor Controls, Solenoid/Relay drivers and Deflection circuit tc @ 8 A, 100u0001C is 120 ns (Typ). You can download this datasheet for MJE13009 NPN High Power Transistor from the link given below:
What is a mje13009 circuit?
The MJE13009 is a high-voltage, high-speed power switching inductive circuit with a critical fall time. Switching Regulators, Inverters, Motor Controls, Solenoid/Relay Drivers, and Deflection Circuits are among the many 115 and 220 V switch-mode applications that they are well suited for.
What are the characteristics of UTC mje13009d?
It is characterized by high breakdown voltage,high current capability, high switching speed and high reliability. The UTC MJE13009D is intended to be used in a energy-saving lig
What is the operating junction temperature (Tj) of a Motorola transistor?
MJE13009 Datasheet, Equivalent, Cross Reference Search. Transistor Catalog Max. Operating Junction Temperature (Tj): 150 °C Order this documentMOTOROLAby MJE13009/DSEMICONDUCTOR TECHNICAL DATAMJE13009**Motorola Preferred DeviceDesigner’s Data Sheet12 AMPERESWITCHMODE SeriesNPN SILICONPOWER TRANSISTOR