## What is 5 foot 7 in inches in meters?

How to Convert 5 feet + 7 inches to cm or m? Now, add the two partial results to obtain the final value in cm: 152 + 17.8 = 170cm. Divide the value 1.7cm by 100 to get the result in meters.

## Is 173 cm tall for a guy?

As you know growth in length is dependent on your ancestry, where you live. So 173 cm is clearly much above the mean height of a 22 yo Indian male. So 173 cm is clearly much above the mean height of a 22 yo Indian male.

## What is 6 feet 0 inches in inches?

Human Height Conversion Table

ft in | inches | centimeters |
---|---|---|

5’9” | 69in | 175.26cm |

5’10” | 70in | 177.80cm |

5’11” | 71in | 180.34cm |

6’0” | 72in | 182.88cm |

## What is the height 5’7 in inches?

The conversion factor I remember is that there are 2.54 centimeters in 1 inch, so first I would change the feet to inches. 5 12 = 60 so 5’7″ = 67″.

## What is 1.75 meters in feet?

5 feet and 8.9 inches

## How tall are Elsa?

5’7″

## How tall is 1 meter 84 cm in feet?

This conversion of 1.84 meters to feet has been calculated by multiplying 1.84 meters by 3.2808 and the result is 6.0367 feet.

## What is the meaning of 1.75 m?

1.75 m equals 5.74 feet.

## What is 6 feet tall in inches?

Feet to Inches table

Feet | Inches |
---|---|

4 ft | 48.00 in |

5 ft | 60.00 in |

6 ft | 72.00 in |

7 ft | 84.00 in |

## Is 5 feet considered short?

Speaking of statistics, men are considered short if they are 5′7″/171 cm or shorter (1 standard deviation below average). They are considered very short if they are 5′4″/163 cm or shorter and “midget” if they are 5′1″/155 cm or shorter.

## What is the meter of 5 7?

Quick Lookup Metres to Feet & Inches Common Conversions

m | ft & in |
---|---|

1.70 | 5′ 7″ |

1.75 | 5′ 9″ |

1.80 | 5′ 11″ |

1.85 | 6′ 1″ |

## How many cm is 5’7 feet?

Conversion Chart

Feet and Inches | Centimeters |
---|---|

5 feet 6 inches | 167.64 cm |

5 feet 7 inches | 170.18 cm |

5 feet 8 inches | 172.72 cm |

5 feet 9 inches | 175.26 cm |

## Is 6 feet a good height?

The average Indian male height is 5feet 5inches. In India for a boy, 5′ 9″ & 5′ 10″ is considered a good height. But yes if you are 6feet tall or above you fit in the category of tall people. I am myself 6 feet tall so that is what I have observed everytime.

## Does 10 10 feet mean?

As Quora User says elsewhere, 10′ commonly means ten feet, 3.048m, a length.

## How do you write feet and inches?

The IEEE standard symbol for a foot is “ft”. In some cases, the foot is denoted by a prime, often approximated by an apostrophe, and the inch by a double prime; for example, 2 feet 4 inches is sometimes denoted as 2′ 4″.

## How do you write 12 inches?

First, if you say “12 inches,” that’s easy. It’s just 12 inches! When we have an area 4 inches wide by 3 inches tall, it’s 12 square inches. It’s a measurement of area, indicated by the word “square” and the little ².

## How rare is 7 feet tall?

About 2800 people in the world are 7 feet tall or taller. Considering that the world population is approximately 7.4 billion people, this means that the percentage of 7 footers is 0.000038%. This incredibly small percentage of people explains why they are extremely sought for in the NBA.

## Which is more 12 inches or 1 foot?

1 Foot (ft) is equal to 12 inches (in). To convert feet to inches, multiply the foot value by 12.

## How do you find Length Width Height and Area?

First, measure the rectangle’s length and width. Then calculate the total area of the rectangle. Next, measure the triangle’s base width and height (top-to-bottom length). Then divide the base by 2 and multiply this number by the height.

## How do you know length and width?

Length is describing how long something is while width is describing how wide an object is. 2.In geometry, length pertains to the longest side of the rectangle while width is the shorter side. 3.

## How do you write inches in quotation marks?

You are right: quotation marks are irrelevant. The inches symbol must be closed up to the number, which puts the period at the very end, after the entire expression: 4″ × 5″. Also, please note that the symbol for inches is the double prime (″), not double quotation marks (”) or straight quotation marks (“) or (gasp!)

## WHAT IS SIGN OF inch?

The international standard symbol for inch is in (see ISO 31-1, Annex A) but traditionally the inch is denoted by a double prime, which is often approximated by double quotes, and the foot by a prime, which is often approximated by an apostrophe. For example, three feet two inches can be written as 3′ 2″.

## Who invented inches?

The old English ynce was defined by King David I of Scotland about 1150 as the breadth of a man’s thumb at the base of the nail. To help maintain consistency of the unit, the measure was usually achieved by adding the thumb breadth of three men—one small, one medium, and one large—and then dividing the figure by three.

## How do you write dimensions?

It needs to be written Length X Width X Height. That is standard for measurements.

## How can I calculate my height?

To get your height in inches alone from the way it’s usually presented (e.g. 5′ 7″), multiply the total number of feet by 12 and then add the remainder. For example, a 5′ 7″ person is (5 × 12) + 7 = 67″ tall. To convert inches to centimeters (in to cm), simply multiply by 2.54.

## How do you find the length when you have the area and width?

Area of a Rectangle Formula. The area of a rectangle is the product of the breadth and length of a rectangle. A = L * W, where A is the area, L is the length, W is the width or breadth. NOTE: When multiplying the length by the width, always ensure you work in the same unit of length.

## What is width example?

more The distance from side to side. Example: the width of this door is 80 cm.

## Is it 7 inches or feet?

0.ft

## What goes first length or width?

For example, when referring to blueprints or the size of a room, the dimensions are listed with width first and length second. Likewise, when measuring windows, the width comes first then the height. Conversely, when expressing the measurements of a painting on canvas, the height comes first then the width.

## Why are there 12 inches in a foot?

In the 14th century, King Edward II of England ruled that 1 inch equalled 3 grains of barley placed end to end lengthwise. Foot: In ancient times, the foot was 111/42 inches. Today it is 12 inches, the length of the average man’s foot. Yard: A yard was originally the length of a man’s belt or girdle, as it was called.

## What is the LxWxH?

Standard corrugated boxes are measured as: Length x Width x Height. (LxWxH) where the height is the vertical dimension of the box when the opening is facing upwards.

## Which way is length and width?

When a rectangle is drawn “slanted” on the page, like this, it is usually clearest to label the long side “length” and the other side “width,” as if you were labeling a road.

## Does apostrophe have feet or inches?

In the U.S., the common symbol for feet is the apostrophe (‘), while the symbol for inches is commonly the quote (“).

## How do you write 5 feet 8 inches?

For example, 5 inches, 8 feet, 5 ounces, 100 pounds, etc. Just like Chicago Manual Style, you can use a hyphen as well if the dimension is an adjective before nouns: 8-foot pole, the 10-ounce crackers, the 170-pound dog, etc. The third rule is you don’t need hyphens if you’re describing someone’s height.

## Which side is Length Width Height?

Length is always the longest side of the box that has a flap. The next dimension is width. The width side also has a flap, but is always the side shorter than the length. Measure the height of the package.

## Is length always the longer side?

The length of a rectangle is always the longest side. Length is defined as the longest dimension of an object. So for the rectangle the longest one becomes the length whether it’s horizontal or vertical.

## What is W * D * H?

Dimensions (W x D x H)-Graphic Cards This the measurement of the product’s width, depth and height. Depth is the external measurement from the front to the back of the product and height is the outer measurement of the product from its base to the top.

## Which is width and height?

Width always comes before height. If you hold the sheet of paper as you would read it that is your width by height. Left to right (width) by top to bottom (height).