What does OSHA say about handrails?
The top rail must be at least 42 inches in height (§1910.29(f)(1)(ii)(B)) and the handrail must be 30 to 38 inches in height (§1910.29(f)(1)(i)) (as measured at the leading edge of the stair tread to the top surface of the rail).
Is it a legal requirement to have a handrail on stairs?
Handrails are mandatory. Stairs should have a handrail on at least one side if they are less than one metre wide, and on both sides if wider than this. Handrails should be placed between 900mm and 1000mm above the highest point on the staircase steps.
Does OSHA require handrails on both sides of stairs?
Reply: OSHA standard 29 CFR 1910.24(h) provides: Standard railings shall be provided on the open sides of all exposed stairways and stair platforms. Handrails shall be provided on at least one side of closed stairways preferably on the right side descending.
Who does 29 CFR 1910 apply to?
all workplaces
The general standards at 29 CFR 1910 are applicable at all workplaces unless specifically prohibited or preempted by a specific standard which is directly related to the ongoing employee activities.
What does 29 CFR Part 1926 say about scaffolds?
( a) Scaffolds. Scaffolds used in general industry must meet the requirements in 29 CFR part 1926, subpart L (Scaffolds). ( 1) Anchorages.
What is Section 29 CFR section 1025?
29 CFR § 1910.25 – Stairways. § 1910.25 Stairways. (a) Application. This section covers all stairways (including standard, spiral, ship, and alternating tread -type stairs), except for stairs serving floating roof tanks, stairs on scaffolds, stairs designed into machines or equipment, and stairs on self-propelled motorized equipment.
What are the minimum clearance requirements for stair rail systems?
The employer must ensure: Handrails, stair rail systems, and guardrail systems are provided in accordance with § 1910.28; Vertical clearance above any stair tread to any overhead obstruction is at least 6 feet, 8 inches (203 cm), as measured from the leading edge of the tread.
What is the minimum width of stairs in the US?
Have a minimum width of 22 inches (56 cm) between vertical barriers (see Figure D-8 of this section). Exception to paragraphs (c) (2) and (3) of this section. The requirements of paragraphs (c) (2) and (3) do not apply to standard stairs installed prior to January 17, 2017.