What does it mean when vape says check atomizer?
“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn’t reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.
How do I fix check atomizer on mod?
If your coil needs changing for a new one, it can cause this error. So if you think it is time for a new one try putting a new coil in your tank. Taking care to fully prime your coil before use. This should get rid of the ‘check atomizer’ message.
Why is my Eleaf saying no atomizer?
Sometimes, the “no atomizer” or “check atomizer” error comes down to a faulty coil. Even with the most thorough inspection process, a dud coil can slip through. Alternatively, something in the coil may simply break down over time as you use it.
How do you fix a short atomizer on a vape?
Use these steps to troubleshoot a “Check Atomizer” error.
- Remove the tank from your mod. Has e-liquid leaked into the mod’s threading?
- Disassemble the tank, removing the atomizer coil and then screwing it back in tightly. Reassemble the tank.
- Replace the atomizer coil.
How do you fix a short atomizer?
Check Atomizer
- Remove the tank from your mod. Has e-liquid leaked into the mod’s threading?
- Disassemble the tank, removing the atomizer coil and then screwing it back in tightly. Reassemble the tank.
- Replace the atomizer coil.
What causes atomizer short?
If your vape mod displays the error message “Atomizer Short,” it means that the device detects the atomizer coil, but the circuit is short or incomplete. A short circuit can cause an unsafe load on a battery, so your vape mod should detect the short circuit and display an error message when you try to vape.
How do I fix my vape when it says no atomizer?
Recap
- Clean all contacts on battery/mod, tank or pod.
- Remove and reinstall the coil (after cleaning)
- Try a new coil.
- Check the 510 pin and see if you can adjust it (mods/tanks)
- Try another tank on your mod.
- Try another mod with your tank.
- Adjust base of coil carefully if you can (mainly sub-Ohm coils)