What are the rules for dartball?
A player’s turn is over if they make three outs. If a dart misses the board, it is considered a foul. Just like real baseball, fouls are considered strikes, but they cannot strike out a player. When playing with two players, each player gets to throw five darts or they get out, whichever comes first.
What is the legal distance for throwing darts?
7 feet, 9.25 inches
The official distance is 237cm (7 feet, 9.25 inches) from the front of your dartboard to the back of the throw line (aka Oche or toe line).
What does 2BS mean in dartball?
2BS indicates a single base hit for the batter (additional 2BS information listed in RULE 5.48e).
How do you keep score in dartball?
A player may score by hitting a home run or by any combination of plays after he is “on base” (first, second, or third base) by subsequent batters getting either base hits or home runs that brings him home. A player who advances around all of the bases to score is credited with a run (R).
How high off the ground should dartboard be?
Height of a dart board is 5 feet, 8 inches from the floor to the center of the bullseye. Dartboard measurements should be easy to determine.
How far away is the oche in darts?
The oche is the line behind which the throwing player stands. It is 25mm high and 915mm long and placed in a position where the minimum throwing distance measured from the rear of the raised oche is 2.37m along the floor to a plumb line at the face of the dartboard.
What does sh mean in dartball?
2.38 A “STRIKE” is a legal throw in dartball when so called by the umpire which: (a) Lodges in the strike area when thrown by a batter.
What are the dimensions of a dartball board?
Dartball Setup (Field Pitch Throw) The diagram shown on this page is very typical of the Wisconsin Dartball Dartboard measures 48” x 48” including the foul border area. The ‘Play Area’ diamond point to point 44”. Typically, the dartboard is mounted on an ‘A’ Frame measuring approximately 6′ in height when open.
How far do you stand away from a dartboard in CM?
For steel tip darts, the dartboard face distance is 7 feet, 9 and a ¼ inches, which is 2.37 meters or 237 cm.
How is Oche measured?
Throwing / Toe line or Oche 7′ 9 ¼” (2.37m) from the board to the throw line or 9′ 7 ½” (2.93m) when measured diagonally from the bullseye to the throwing line). This second measure is used when playing on an uneven surface.