What are the clearances for a wood stove?
At least 36 inches of clearance must be allowed between the top of a stove and an unprotected ceiling. Brick or stone provide little or no protection for a combustible wall since they are good conductors of heat. Therefore, by themselves, these are not suitable as wall protectors.
How far away from the wall does my wood stove need to be?
36 inches
The standard clearance recommended by the National Fire Protection Agency is 36 inches. This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.
Can I install my own wood burning stove?
Installing a wood-burning stove fireplace yourself isn’t safe. Hire professionals who are trained and certified to install wood stoves. Hiring an experienced installer means you’ll get to enjoy all the benefits of a home wood stove, with none of the risks.
What is the required distance between the floor and a stove?
Floor protection should extend a minimum of 12 inches from the sides of the stove and a minimum of 18 inches from the front. If you have a side-loading stove, the floor protection should extend 18 inches on that side. Those clearances should be enough to protect you from sparks and embers.
What is the minimum clearance for a wood stove to non-combustible?
No clearance is needed for stoves or stovepipes to noncombustible walls (i.e., concrete walls or dirt floors). It is a good practice, however, to allow six inches or more for good air circulation and heat dissipation.
What do I put on the wall behind a wood stove?
A heat shield can be installed on the back of a stove to help reduce the distances between the stove and any combustible materials. Heat shields are typically specific to each stove and so must be bought as an optional extra when buying a stove, or can potentially be retrofitted at a later date.
How close can a wood stove be to cement board?
A combustible floor must be protected by a non-combustible material (like tile, concrete board, or certified to UL-1618 or as defined by local codes) extending beneath the heater and a minimum of 6″ from each side and minimum 16″ from the front face of the stove and minimum 6″ (or the rear clearance to combustibles …
Do you have to put anything behind a wood stove?
Stone or brick is a common material to use behind a wood burning stove. These panels help create more of a focal point for a room. What is this? The NASD explains that any area within 36 inches of the stove in all directions should be covered.
Is drywall OK behind a wood stove?
Drywall is combustible and not a suitable material either for use behind the wood stove or for use underneath tile. Removing it from the wall behind the wood stove allows you to install cement backerboard instead.
What are the safety recommendations after installing a wood stove?
There are several safety recommendations to follow after installing a wood stove: install a 10-pound ABC fire extinguisher, and a smoke detector in the home. familiarize house occupants with fire evacuation procedures. Adding a wood stove to a home will change the fire evacuation routes and these must be well understood by all occupants.
What do I do if I want to install a stove?
You may also want to call your local fire marshal, as, in some jurisdictions, installing a wood stove requires an inspection to approve the validity of the installation. Finally, you may also want to contact the issuer of your homeowner’s insurance, as installing a wood stove may change your liability.
Do you need a building permit to install a wood stove?
If you need to get a building permit to install your stove, the officials in this department should be able to help you get one. You may also want to call your local fire marshal, as, in some jurisdictions, installing a wood stove requires an inspection to approve the validity of the installation.
What are the maintenance procedures for a wood stove?
Use of a wood stove requires regular attention to a few maintenance procedures–proper cleaning of the chimney to remove creosote deposits, and regular inspection of the installation and handling of ashes. Creosote is an inevitable by-product of burning wood.