Is RockSolid better than epoxy?
RockSolid claims that their Polycuramine garage floor coating is 20 times stronger than epoxy paint and has a 96% solids content. It is impervious to all chemicals and comes with a high gloss finish. It can be installed in one day, walked on in 8 – 10 hours, and driven on within 24 hours.
Is RockSolid better than epoxy shield?
This great hard surface is twenty times stronger than regular two-part epoxy paint — even stronger than our EpoxyShield. It’s the best-looking and strongest garage coating you’re going to get.
How long does RockSolid last?
| If Temp is 40-75°F: | If Temp is 76-90°F: |
|---|---|
| Pot life after mixing: 1 hour (do not use product after 1 hour) | Pot life after mixing: 45 minutes (do not use product after 45 minutes) |
| Best results: 12pm (or when temperatures are rising) | Best results: coat early morning (before 9AM) |
Does RockSolid need a top coat?
Yes you can Overcoat or Recoat RockSolid. As a matter of fact it is highly recommended to apply a clear topcoat to enhance both the looks and the performance characteristics of RockSolid Garage Floor Coating.
Which is better Polycuramine or epoxy?
The Garage Floor Coating, like all RockSolid Polycuramine® coatings, offers unsurpassed durability. Polycuramine is 20 times stronger than epoxy. With its resistance to salt, oil, gas and other harsh chemicals, this is one of the toughest floor coatings on the planet.
Which is better epoxy or Polycuramine?
Polycuramine is 20 times stronger than epoxy. With its resistance to salt, oil, gas and other harsh chemicals, this is one of the toughest floor coatings on the planet. It’s easy to maintain and will last a lifetime while still looking fantastic.
Can you put RockSolid over RockSolid?
Can you do a second coat of RockSolid?
A second coat of RockSolid® Floor Coatings can be applied. The floor can be recoated after 8-12 hours and before 7 days without sanding the surface for proper adhesion of the second coat. Ensure the coating is not tacky prior to recoat.
Why is garage floor paint peeling?
When the floor is acid etched like with many DIY projects and the acid is not removed properly, there is a thin layer of loose concrete dust that sits on top of the concrete slab. When the epoxy is applied, it bonds to the concrete dust than to the concrete slab, resulting in peeling off shortly after application.
How do you strip epoxy floors?
The best way to remove epoxy from a concrete floor once it has cured is to use a tool such as a putty knife or a chisel and just scrape away. If necessary, use a hammer to break up the epoxy. However, to avoid damaging the surface, it is better to use a plastic scraper after first softening the epoxy.
Is Rust Oleum rock solid slippery?
Is Rust-Oleum rock-solid slippery? Yes, in a general sense, the Rust-Oleum rock solid is a little bit slippery, especially when it becomes wet. Because coated concrete makes the surface relatively smooth, you should apply a top-quality anti-slip additive topcoat on the floor to make the surface anti-slip.
Why soapstone by ROCKSOLID?
Quarried naturally with absolutely no synthetics, soapstone offers a unique, soft color with light flowing veins. Rocksolid has been a leading fabricator of solid surfaces since 1979.
Why rock solid for local governments?
Today, hundreds of local governments across North America trust Rock Solid as their dedicated partner in engagement and operational efficiency. There’s a shift happening in the way local governments address the needs of their residents.
Why choose ROCKSOLID granite?
Our selections of granite come from all over the world. From classic to exotic and everything in between, our granite fits perfectly with any décor, lifestyle and budget. Rocksolid offers a luxurious line of exotic marble that is truly unique for your special project. We are your quartz specialist.