How do you program a stealth cam?
Your Stealth Cam can be programmed to operation either in PIR Detection mode or Time Lapse / PIR mode. Switch the camera to the Manual position. ➢ LCD screen will display the camera status screen. Press the [MENU] button once within 30 seconds to enter the programming mode, the word PIR or tLS will be blinking.
What does Q1 mean on Stealth Cam?
the first Quick Set programming mode
Q1 – This is the first Quick Set programming mode. When the camera is changed to the this mode, the display screen will give a digital read out of how the camera is preprogrammed. It will. scroll across the display as follows: PHOTO…8.0MP…30 S DELAY…3 PHOTO BURST.
What does instant group mean on Stealth Cam?
Instant Group Photo Upload – The sophistication built into this camera allows you to set it to Instant Group setting for upload. This enables the camera to keep capturing images as long as motion is being detected.
Why is my stealth cam not taking pictures?
Most of the time, if your trail camera is not taking pictures, the problem will fall into one of three categories: an issue with the SD card, an issue with the battery, or an issue with camera placement or settings.
How do I reset my Stealth Cam?
The best way to reset your trail camera is to remove the battery for a few seconds and then put it back in. This will clear any memory that the camera may have and reset it back to factory settings. If this does not work, you can also try using the reset button on the back of the camera.
How do you reset a stealth cam?
How do I know if my Stealth Cam is taking pictures?
By using the test mode. A light on the front of the camera labeled TEST will blink when the camera is detecting motion. Directly face the camera towards the location you are trying to cover and walk in front of it to see the light go on, this will indicate activity.
Why does my Stealth Cam take pictures every minute?
Time-Lapse mode in a trail camera will traditionally operate the camera to take a photo at set time intervals, leaving the PIR sensor inactive to trigger the camera.