How do I reset my Holmes one touch heater?

Here are some common reasons that portable electric heaters shut off:

  1. The thermostat on the heater is not set high enough.
  2. The heater needs to be reset due to an overheat situation.
  3. If the unit has tip-over safety protection: To reset, simply place the heater in an upright position on a level surface.

How do I reset my space heater?

Some space heaters have a high limit safety switch that is resettable. Look for a button on the back of the heater and press it to reset the switch and see if that fixes it.

Why is my Holmes heater not working?

Your Holmes heater might have stopped working because it’s not getting enough power. Check the cord for any damage and make sure the plug is seated properly in the outlet. If you find no problems, contact a certified electrician to inspect your wiring and breaker box.

Why does my fan heater keep cutting out?

Electrical overload: If an electrical component inside the heater is overloaded, it could trigger the circuit breaker, cutting off power to the entire unit. If you have to keep resetting the breakers in order to make the heater function, this is likely the problem.

How do you use a Holmes one touch heater?

Manual Mode Instructions:

  1. Plug the heater into a 120V AC electrical outlet.
  2. To start the unit, push the MODE/OFF button once for the HIGH (1500. Watts) manual setting. (
  3. Press the button again for the LOW (1000 Watts) manual setting. ( See.
  4. To stop the unit, press and hold the button for two seconds or keep press-

Why is my space heater not turning on?

Unit not turning On: One of the most common issues you will come across with space heaters is that the unit does not turn on. If this is the case, check the switch. At times, the switch is not a snug fit for the socket and may not give power to the unit. Also check for a blown fuse.

Why does my electric heater keep going on and off?

The heater turning on and off excessively could be the result of the thermostat being placed in the wrong spot. If it’s installed near a heat-producing appliance, like a kitchen stove, it could confuse the unit into thinking the house is warmer than the actual temperature.

Why does my furnace turn off after a few minutes?

A common reason a furnace short cycles is because the heat exchanger, the part that heats your air, is getting too hot due to a lack of airflow. Once the heat exchanger overheats, it trips the high limit switch, which shuts the furnace down to protect it.

Are Holmes space heaters safe?

HolmesĀ® heaters have various safety features and are approved by Underwriter Laboratories. As stated in the owner’s manual, certain safety procedures need to be followed when using heaters to reduce the risk of fire, electric shock, and injury to persons.

Where are Holmes fans manufactured?

Holmes has been manufacturing quality products at its own facilities in China for over fourteen years. Over the past three years, we have invested in the development of a manufacturing complex in southern China to further strengthen our capabilities.