How do I reset my hitron modem router?

How to Reset your Hitron CGN2 Modem

  1. Locate the Reset button on the back of the modem.
  2. Press and hold the Reset button for 10 seconds.
  3. After 10 seconds, release the button. The modem should restart and the lights will flash.
  4. One the modem is finished restarting and is online the settings will be back to default.

Why is my hitron router not working?

If you just have the Rogers Hitron Gateway, unplug it from power, wait 10 seconds, then plug it back in. If the reboot doesn’t resolve the issue, try restarting the devices that cannot currently connect to the internet. If you still can’t access the internet, contact Technical Support.

What do the lights on a hitron modem mean?

LED: Upstream Green, flashing: The router is searching for a downstream frequency on the CABLE connection. Green, steady: The router has successfully located and locked onto an upstream frequency on the CABLE connection. Blue: The router is engaged in channel bonding on the upstream connection.

How do I reset my hitron router password?

Changing the wireless network password

  1. Enter 192.168.
  2. Log in with the following information:
  3. From the home page, select Manage Wireless.
  4. Select the 2.4G, 5G, or Guest network from the top of the page.
  5. Under the Multiple SSID Settings, next to Passphrase, enter a new network password.
  6. Save your changes.

What is the default password for Hitron router?

Hitron router login normally has a default username “cusadmin“, and the default password “password“. Its default IP address is 192.168. 0.1. These Hitron credentials are needed when doing a login to the Hitron router’s web interface to change any settings.

How do I enable WPS on my Hitron modem?

Once logged in, locate and select “Wireless” at the top of the page. 6. Scroll to the bottom of the page as the last option will be “WPS Enabled”. Change this to “ON” and then select “Save Changes”.

Why does my hitron modem keep disconnecting?

Check that your coax cable connections are secure at the modem and coax outlet. Power your modem off for 10 seconds or more and then power it back on. Restart both your computer and router that connect to your cable modem.

How do I setup my hitron router?

Login Instructions

  1. In the address bar, type in the following: 192.168. 0.1 and press the enter key on your keyboard.
  2. You will be presented with a Hitron login page.
  3. Login with your credentials: Hitron CGNM-2250. Username: cusadmin.
  4. Select the Login button.

What color should the lights on hitron modem be?

In the Hitron user guide, it says steady green means “The CGNVM has successfully located and locked onto a single upstream frequency on the CABLE connection.”. Steady blue means “The CGNVM is successfully engaged in channel bonding on the upstream connection.”

Is hitron a good router?

Hitron is well-known for their high-quality networking equipment, such as their MoCa 2.5 network adapter. So we wanted to see if the CODA modem is up to the same standard of the rest of their devices. It’s extremely fast, with support for up to 10Gbps of traffic.

What is my Hitron password?

What is your review of the cgn2 wireless router?

The wireless performance of the CGN2 is very poor to put it mildly. Range is dramatically reduced and is significantly less than a $35 Asus router. Probably one downfall is the fact that the antenna is actually built into the unit and can’t be aimed or replaced. The second issue was that we couldn’t keep the computers connected to the internet.

What are the features of the Cisco CGN?

The integrated four-port Gigabit Ethernet switch and Wi-Fi 802.11n 3X3 MIMO Access Point enable fast and easy home networking. The CGN supports the full IPv4 routing features as well as full support for IPv6 routing and firewall. The CGN supports both DSLite as well as 6RD for different IPv6 deployment and transition strategies.

Is the Rogers cgn2 really better than its predecessors?

Rogers claims the CGN2 has better wireless performance than its predecessors. That may be the case if the predecessors were dismally bad. The wireless performance of the CGN2 is very poor to put it mildly. Range is dramatically reduced and is significantly less than a $35 Asus router.

Can a HITRON cgn2 be used as a modem?

We called Rogers and sure enough the rep on the other end of the line gave his pitch about why our clients had to have the horribly performing Hitron CGN2 as opposed to the Cisco DPC3825. Finally the rep indicated that he could bridge the router so that it would function strictly as a modem, disabling all of the rather useless features.