How do I force a Brother printer to reset?

Unplug all the interface cables before you perform a Factory Reset.

  1. Press the Up or Down arrow key to select Initial Setup, and then press OK.
  2. Press the Up or Down arrow key to select Reset, and then press OK.
  3. Press the Up or Down arrow key to select Factory Reset, and then press OK.

How do I reset my hl2270dw?

Brother HL-2270DW – Factory Reset

  1. Turn off the printer.
  2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
  3. Release GO, all the LEDs will turn off.
  4. Press GO ten (10) times. The printer will automatically restart.

How do I reset my Brother HL L5200DW printer?

HL-L5100DN/HL-L5200DW/HL-L5200DWT/HL-L6200DW/HL-L6200DWT

  1. Press or to select the [Network] option, and then press OK.
  2. Press or to select the [Network Reset] option, and then press OK.
  3. Press for [Yes]. The machine will restart.

How do I reset my Brother HL l2380dw printer?

Reset the Network Settings to the Factory Settings

  1. Press. (Settings) > All Settings > Network > Network Reset.
  2. Reset Network? will be displayed. Press Yes.
  3. Reboot OK? will be displayed. Press Yes for two seconds to confirm. The machine will restart.

How do I reset my Brother HL L2370DW?

How to reset factory default settings for Brother HL-L2350DW / HL-L2370DW / HL-L2370DW XL printers

  1. Press the up or down arrows to navigate to “Initial Setup” and then press “OK”
  2. Use the up and down arrows again to select “Reset” and then press “OK”

How do I reset my Brother printer when it wont turn on?

3.1 Method 1

  1. Remove the power cord for at least 30 seconds.
  2. Press and hold the ON/OFF button down, and then insert the power cord back into the Brother machine.
  3. Do not release the ON/OFF button until the machine has been powered on completely or after 15 seconds.
  4. Repeat this procedure up to three times if necessary.

How do I reset my Brother HL 2170w?

Make sure that the Toner, Drum and Paper LEDs are off. Press the Go button seven times. Make sure that all the LEDs light up to indicate the print server has been reset to its default settings.

How do I reset my brother hl 2250dn?

Brother HL-2250 – Factory Reset

  1. Turn off the printer.
  2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
  3. Release GO, all the LEDs will turn off.
  4. Press GO ten (10) times. The printer will automatically restart.