How do I find my IBM IMM IP address?

Obtaining the IP address for the IMM

  1. Turn on the server.
  2. When the prompt Setup is displayed, press F1.
  3. From the Setup utility main menu, select System Settings.
  4. On the next screen, select Integrated Management Module.
  5. On the next screen, select Network Configuration.
  6. Find the IP address and write it down.

How do I access Lenovo IMM?

To log on to the IMM web interface, complete the following steps:

  1. On a system that is connected to the server, open a web browser. In the Address or URL field, type the IP address or host name of the IMM to which you want to connect.
  2. On the Login page, type the user name and password.
  3. Click Log in to start the session.

How do I connect to IMM with IBM?

Open a Web browser. In the address field, type the IP address of the IMM to which you want to connect. The Enter Password window opens. Use the default login ID value of USERID and password value of PASSW0RD (with a zero instead of O) to sign on.

What is IMM IP address?

192.168.70.125
Note: If you are logging on to the IMM for the first time after installation, the IMM defaults to DHCP. If a DHCP host is not available, the IMM assigns a static IP address of 192.168. 70.125. On the Login page, type the user name and password.

What is IMM in IBM server?

The Integrated Management Module (IMM) is a management module that is used for systems-management functions. On the back panel of each appliance type, the serial connector and Ethernet connectors can be managed by using the Integrated Management Module (IMM).

How do I change my IMM IP address?

Log in to the user interface of the IMM of your appliance. A form displaying the current network configuration, which may take a moment to load, will be displayed. Use this form to update your hostname, IP address, subnet mask, and default gateway information, as needed. Click Save.

How do I reset my IMM?

To restore the IMM2 factory defaults, complete the following steps:

  1. Log in to the IMM2.
  2. Click the IMM Management tab; then, click IMM Reset to factory defaults….
  3. Click the OK button on the Confirm Reset to factory defaults window (as shown in the following illustration).

What is Lenovo IMM?

Integrated Management Module. In older System x servers, the Integrated Management Module (IMM) consolidates the service processor functionality, Super I/O, video controller, and remote presence capabilities in a single chip on the server system board.

How do I access IMM Qradar?

How to locate your ‘Machine Type’ and ‘Serial Number’ information

  1. Using an SSH session from the Console type the command: /opt/qradar/support/deployment_info.sh -HO.
  2. If you can boot the host, you can type the following command to get :#dmidecode -t 1.

How do I reset my IMM password?

Solution

  1. System settings.
  2. Integrated Management Module.
  3. Reset IMM to defaults.
  4. REMEMBER this will reset the name and IP settings, so you need to update them, and DON’T FORGET to press ‘Save Network Settings’, or nothing happens!
  5. You can now use the default username USERID and default password (PASSW0RD).

What is IMM in software?

Answer. The Integrated Management Module (IMM) is a service processor on System x server hardware. IMM provides management access to IBM System x rack server hardware.

What is IMM for?

International Monetary Market (IMM)

How do I configure the integrated management module (IMM)?

If you have set both a power-on password and an administrator password, you must type the administrator password to access the full Setup utility menu. From the Setup utility main menu, select System Settings. On the next screen, select Integrated Management Module. On the next screen, select Network Configuration.

What is the default IP address for the IMM?

The server comes with a default IP address for the IMM of 192.168.70.125. Obtaining the IP address for the IMM – IBM System x3550 M3 Obtaining the IP address for the IMM

What happens if the RAID controller is missing in x3650 M4?

In the case of the Redundant Array of Independent Disks (RAID) controller missing in x3650 M4, the operating system may not load properly and the ServeRAID M5110e SAS/SATA controller is no longer seen by the server Basic Input/Output System (BIOS).

How do I connect the IMM to the server?

On a system that is connected to the server, open a web browser. In the Address or URL field, type the IP address or host name of the IMM to which you want to connect. Note: If you are logging on to the IMM for the first time after installation, the IMM defaults to DHCP.