How do I enable GPS on Tkstar?

Search “TKSTAR GPS” in the Apple App Store/Google Play Store or Scan the QR Code to install the applications on your cell phone. Click the icon “TKSTAR GPS” on desktop and then login the ID and the password of the device (the default password is 123456).

Why is my Tkstar GPS tracker offline?

Why does the device shows “offline” on platform? 1). Check if there is Cut off alarm or Remove Alarm and Low Power Alarm on APP, because device will show offline if it has been disconnected. Reinstall or Recharge for the device to make it online is ok.

How do I connect my Gpswox?

How to configure GPS tracker?

  1. Buy SIM card with internet plan.
  2. Remove SIM card’s PIN code. Click here to see how to do it on: iOS, Android, Windows Mobile.
  3. Insert SIM card in to the GPS Tracker.
  4. Configure your GPS Tracker to send data to GPSWOX.COM servers.
  5. Your GPS Tracker is ready to send data !

How do I setup my Mini GPS tracker?

Turn on the GF07 GPS tracker Open the cap and insert the SIM card in the direction indicated. Insert the mini memory card. The product will automatically turn on the red light for four times and then turn off. After 30 seconds, it will enter the normal standby state.

Why is my GPS tracker not working?

Accuracy problems are usually caused weak GPS signal, in most cases it happens because GPS antenna is not able to establish good signal. Weak signal can be related to not properly positioned antenna, surrounding which blocks signal (tall buildings, tunnels, garage, underground parking lot) or low quality device.

How do you connect a GPS tracker?

But we’re here to tell you in plain terms: to install a GPS tracker on your car, simply connect the tracker’s red wire to the car’s constant power wire, and the tracker’s white wire to the car’s ignition wire. Fix the GPS tracker beneath the dash with double-sided tape – near the ignition coil is a good spot.

How do you set up a tracking device?

* contact the seller you got device from if you don’t have those.

  1. Step 1: Disable PIN password on SIM card. New SIM cards have PIN password check on by default.
  2. Step 2: Insert SIM into tracking device.
  3. Step 3: Set up tracking device for TrackSW.
  4. Step 4: Install tracking device.
  5. Step 5: Add tracker to your trackers list.

Can you turn on Tracki remotely?

Not allowing you to control it remotely. You will have to wait for the device to wake up for any changes in settings or to remove it from the battery saver mode. You will also lose the ability to manually request a location from the device in real-time.

Why is my GPS tracker not updating?

Your tracker sends its location back over the cellular network, so adequate cell service is required. If your tracker hasn’t updated in a while, there is a good chance it’s in a cellular dead zone and will update as soon as it moves out of that area.

How to track tkstar GPS tracker?

Since TKstar gps tracker is hot in market, users can choose different gps tracking softwares and create account to login and track tkstar gps tracker, like those GPSWOX, GPS-SERVER, GPS-TRACE, GPSGATE, etc. However, these gps tracking software either charge or free account supports track single vehicle only.

Is tkstar a brand?

The TKSTAR brand is applied in 2014-09-24 and it is still under investigation, which means TKSTAR is not a brand yet and no one owns it. Is TKSTAR a series of product?

How does the GPS tracker work?

GPS Tracker Working based on existing GSM/GPRS/WCDMA/LTE network and GPS/LBS/Glonass satellites, Device report the real time satellites location information to tracking server via GSM/GPRS/WCDMA/LTE network.and user can use PC/APP to track and monitor device location information on tracking server. 2.How to set admin number?

How to set IP and port on tracking platform?

Normally,we have preset the IP and Port on our tracking platform as default . if you want to track it on others tracking platform,please provide us with your IP and port,then we could help you set IP and port before shipping. Or you can send following commands to set: E.g: adminip123456 154.85.52.178 7700