How do I connect my XBee to WiFi?

Connecting to a WiFi Network With XCTU

  1. Plug your XBee into your XBee Explorer, and plug the Explorer into your computer.
  2. Open XCTU.
  3. Hit Test/Query to make sure you can communicate with your XBee WiFi.
  4. Click over to the “Modem Configuration” tab.
  5. Select “Active Scan” near the top of the scrolling window.

Is XBee a WiFi module?

XBee Wi-Fi modules are designed to communicate with access points in existing 802.11 infrastructures. Developers can use AT and API commands for advanced configuration options. Embedded Wi-Fi modules provide ultra low-power 802.11b/g/n communications in the flexible XBee hardware and software footprint.

What is at mode in XBee?

AT mode is synonymous with “Transparent” mode. In AT mode, any data sent to the XBee module is immediately sent to the remote module identified by the Destination Address in memory.

How do I connect XBee modules?

Add XBee modules to XCTU

  1. Connect two XBee modules to your computer using the USB cables.
  2. Launch XCTU.
  3. Click the Configuration working modes button .
  4. Click the Discover radio modules button .
  5. In the Discover radio devices dialog, select the serial ports where you want to look for XBee modules, and click Next.

What is XCTU?

XCTU is a free multi-platform application designed to enable developers to interact with Digi RF modules through a simple-to-use graphical interface. It includes new tools that make it easy to set-up, configure and test XBee® RF modules.

How do I connect XBee to Arduino?

Just hook up the XBee module to the Explorer board and plug it with the laptop using USB cable. If you don’t have any converter or explorer board, then an Arduino board can be used as a USB to serial device which can easily communicate with the XBee and laptop.

How do I install XCTU?

Install XCTU – Windows

  1. Go to www.digi.com/xctu.
  2. Click Download XCTU.
  3. Under Utilities, click the Windows installer link.
  4. When the file has finished downloading, run the executable file and follow the steps in the XCTU Setup Wizard. A “What’s new” dialog appears when installation is complete.

What is XBee?

What is Zigbee? Xbee is Digi International’s in house Zigbee communication module brand. What is XBee? Mesh Network Topology ● Node connected to moisture sensor that gives off it’s reading in volts ● Data transmits to Coordinator (receiver) node ● Data collected using a Python script. Example Project

How do I set XBee’s PAN ID?

To set XBeeʼs PAN ID # type the command. PAN IDs are represented in hexadecimal. ATSH/ATSL 64-Bit Address (or Serial #) distinct to each XBee unit Type ATSH to return the upper half of your XBeeʼs Address. Type ATDL to return the lower half of your XBeeʼs Address.

What are the features of XBee DigiMesh?

●DigiMesh Firmware ○Self healing, ad hoc mesh network ○Sleep Synchronization ○All nodes can sleep ●6 Different 10-bit A/D registers ●Analog Input pins good up to 3.3V ●90 m range outdoors (with line of sight) XBee DigiMesh 2.4 RF Module Hardware Setup Required Zigbee Voltage Supply ● Constraint: 2.8V – 3.4V

Where can I find the serial address of my XBee?

Each XBee has a unique 64-bit serial address that is not changeable by the user, it is printed on the backside of each unit and can also be read off the unit using the X-CTU tool. Destination Address: Configuration