How do I access my Tenvis camera remotely?

Drag TENVIS Search Tool into Applications to install the search tool in MAC. After installation, run on desktop for Windows or in launch pad for Mac. Internet URL Camera’s remote view URL. You can click Open to view the camera from Internet after you finish the Internet View configuration.

How to connect to Tenvis camera?

Configure Tenvis TZ100 / IProbot3 HD 720P PTZ Camera for Cloud Recording, Monitoring and Playback

  1. Introduction.
  2. Step 1: Connect camera to the network and find IP address.
  3. 1.1 Connect camera to the network.
  4. 1.2 Find the Camera’s IP Address.
  5. Step 2: Configure the Camera Using the Web-based Configuration Tool.

What app do you use for Tenvis camera?

TENVIS P2P HD is a free app for remote surveillance, control and video recording of wireless IP/Network cameras. TENVIS P2P HD have the functions of account management.

How do I set up my Tenvis IP camera JPT3815W?

Get out your Tenvis JPT3815W and connect it to the internet and a power source. Navigate to the camera’s network access page and Log in. Go to Sensr.net and add a new camera. Go back to the camera’s network access page and add your new FTP credentials.

Why wont my surveillance camera connect to WIFI?

Hold your phone in the location of your camera and check the number of dashed Wi-Fi coverage on your phone. If the connection is poor, if possible, reduce the distance between the camera and your Wi-Fi router. Consider a wired installation or consult your internet provider for solutions.

How do I connect my surveillance camera to Wi-Fi?

How to use Wireless Security Cameras with a WiFi Router

  1. Step 1: Determine the WiFi strength of your wireless network.
  2. Step 2: Power and Configure the Wireless Security Camera for your Network.
  3. Step 3: Access the IP Camera’s Web Interface.
  4. Step 4: Configuring the WiFi Address.
  5. Step 5: Connect to Your Wireless Router.

How do I reset my WiFi camera?

You need to reset the cameras by pressing the reset button on the bottom of the cameras for 10 seconds (led red flashing means reset is complete). After resetting the cameras, you need to plug the ethernet cable inside the camera’s connectors and connect it to the new router. Delete the cameras in the “Added device.”

Where is the reset button on Neye3C?

We have a reset button at the bottom of the camera….Thank you.

  1. Delete the connected camera on the “Neye3C” app.
  2. Press and hold the 2 second reset button to reset the camera.
  3. Reconfigure this camera on the “Neye3C” APP see less Dear friend.