Can I add SawStop to any table saw?
No. It is not economically practical to retrofit other manufacturers’ table saws. The structural changes necessary to incorporate the safety system into another saw and the cost to have it installed would exceed the cost of a new saw.
How big should an outfeed table be?
An outfeed table should be big enough for the table saw model you have. Typically, the height of an outfeed table is 34 inches as this matches the height of most table saws. It’s also ideal to make it ⅛ inch lower than your saw table.
Can you cut wet wood with SawStop?
SawStop saws cut most wet wood without a problem. However, if the wood is very green or wet (for example, wet enough to spray a mist when cutting), or if the wood is both wet and pressure treated, then the wood may be sufficiently conductive to trigger the brake.
Can you cut plastic on SawStop table saw?
Run the saw in Normal Mode to cut non-conductive materials like wood, plastic, cardboard, foam, Corian, melamine and dry pressure-treated wood. Conductive materials will trigger the SawStop.
Can you use Freud blades on SawStop?
The Freud P410 is an example of a blade suited to the sawstop, if your primary concern is optimal blade brake performance. see less You should use a 1/8″ kerf blade without an anti-kickback shoulder. There are many options from all manufacturers.
What is a SawStop outfeed table?
Designed specifically for SawStop Cast Iron Saws, these outfeed solutions have a minimal footprint impact. Engineered from steel for maximum carrying capacity, the outfeed table with integrated rollers easily and quickly folds away when not in use.
What is a folding outfeed table saw used for?
The outfeed table is designed for easy adjustability and maximum glide, with strategically-placed rollers for smooth operation. Compatible with all SawStop Cast Iron Table Saw mobile bases, the Folding Outfeed Table quickly stows for an easy move.
What is an outfeed table for a cast iron saw?
Designed specifically for SawStop Cast Iron Saws, these outfeed solutions have a minimal footprint impact. Engineered from steel for maximum carrying capacity, the outfeed table with integrated rollers easily and quickly folds away when not in use. The Folding Outfeed Table is engineered with flexibility in mind.
Can the TSA-fot be used with the contractor saw?
Depending on your saw and table configuration, when folded the table may hang at 90 degrees to the saw, or rest against a dust collection hose. UPDATED 5/1/18: The TSA-FOT is not compatible with the Contractor Saw.