What do the numbers on Hunter nozzles mean?
By referring to the Hunter PGP performance chart you will note the following: • As the nozzle size goes up the flow rate goes up. I.e. the flow rate on a Number 1 nozzle is. AT 206 KPA is 1.8 Litres per Minute (LPM), while a number 6 nozzle at the same pressure (206 KPA) has a flow rate of 7.4 LPM.
What is the difference between Hunter PGP and PGJ?
The safety and durability of a rubber cover…just like PGP. The PGJ is a chip off the ol’ block, in essence a PGP “junior.” Hunter has scaled down the world’s top-selling sprinkler exclusively for use in applications that typically call for a spray but where it’s now possible to have all the benefits of a rotor.
How do you adjust a Hunter PGJ sprinkler head?
To Increase Arc
- Insert the plastic key end of the Hunter wrench into the adjustment socket on top of the sprinkler.
- While holding the nozzle turret at the right stop, turn the wrench clockwise.
- Wrench will stop turning when adjusted to the maximum arc (360°). Do not go past this stop.
- Adjust to any arc between 40°-360°.
How far does a hunter PGP spray?
Frequently Asked Questions About The Hunter PGP-ADJ
| Brand | Hunter |
|---|---|
| Pressure Range (PSI) | 25-70 |
| Warranty | 2 Years |
| Spray Pattern | Part Circle Adjustable (40 – 360) |
| Spray Radius | 22 ft. – 52 ft. |
How do I choose a sprinkler head replacement?
It is important when planning your sprinkler system to keep in mind that the distance between each rotary head should be less than the PSI supplied to each rotary head. For example: you wish to install a rotary head every 35 ft. This means that you will need at least 36 PSI supplied at each rotary head.
Do Hunter sprinkler heads have filters?
All of Hunter’s rotors, MP Rotators, and spray nozzles come from the factory with a filter (debris) screen. If flow has been reduced and the product isn’t performing as normal, simply check the screen for debris and remove/clean if necessary.
How do I change the direction of my sprinklers?
When you have the sprinkler going, use a flat-head screwdriver to rotate the adjustment screw found on the top of the nozzle. If you need to increase the width of the spray pattern, turn the screw counterclockwise. If you want to decrease it, turn the small screw clockwise.
What benefit’s do the PGP ultra blue nozzles offer?
Features & Benefits Among the most notable improvements of the PGP Ultra is its non-strippable drive and automatic arc return. These two features work to allow the turret to be turned without causing damage, and return the turret to its original arc regardless of where it is turned.
How do I know what size sprinkler head I need?
What is a PGJ sprinkler system?
The PGJ was built to bring all the efficient benefits of rotary sprinklers to applications that typically call for a spray. Its many features include a rack of easy-to-install-and-change, water-efficient nozzles, easy arc adjustment, and all the safety and durability that comes with a rubber cover.
What is the difference between the pgj-00 and PGJ-04 models?
1Models PGJ-00 = Shrub PGJ-04 = 4″ Pop-up PGJ-06 = 6″ Pop-up PGJ-12 = 12″ Pop-up 2Feature Options (blank) No option R Drain check valve and reclaimed water ID
What is a PGJ and how does it work?
The PGJ is capable of working in tandem with larger rotors to combine big and small areas in a single zone, offering a convenience and efficiency that sprays do not. When used in the right application, the PGJ allows fewer heads to perform more efficiently at a more economical price.
What is headed and slotted set screw PGJ?
Headed and slotted setscrew allows radius adjustment with a Hunter wrench or flat-blade screwdriver Adjustable arc from 40° to 360° to keep water in the appropriate areas Standard factory installed 2.0 nozzle speeds installation QuickCheck™ arc mechanism for fast arc adjustment Advanced Features Headed and Slotted Set Screw PGJ