How do you use a Koko vape?
Filling the Pod
- Remove the mouth piece and fill through one of the 2 fill holes either side of the centre hole.
- Squeeze your bottle until the pod is full with 2ml of liquid.
- Replace the mouth piece.
- Place the pod into the device pushing until it clicks.
Why is Koko flashing blue?
When charging the device with a Type-C charging cable, the indicator light flashes slowly to indicate that the product is charging. It will flash red to indicated low battery, flash blue to indicate medium power, flash green to indicate sufficient power, and the green light stays on after charging is completed.
How do you know when caliburn Koko is fully charged?
There’s an LED on the Caliburn Koko that lights up in three colors: green, blue and red. Green is full battery, blue is medium and red is low. When the Koko is out of the juice the LED will blink red.
Why is my caliburn Koko not hitting?
Remove the pod, and use a cotton swab to gently clean the bottom of the surface. This will absorb the excess e-juice that may be blocking the draw sensor, and most likely solve the “no firing” issue. If you still get no vapor when taking a draw without pressing the button, you may have damaged the sensor.
How long does it take for a Koko to charge?
40-45 minutes
The Koko Prime charges from completely dead to a full charge in 40-45 minutes.
How long does it take to charge Koko vape?
about 40 – 45 minutes
Battery Life and Charging Uwell Caliburn Koko Prime runs on a 690mAh battery and boasts a maximum wattage output of 15w. It uses Type-C charging and it takes about 40 – 45 minutes to fully charge the device from dead.
How do I know if my Koko is charging?
Just plug the supplied charging cable into a suitable USB outlet and insert the cable into the USB port on the KOKO. The battery LED indicator will flash while the KOKO is charging – red, blue and green depending on the battery level. When it’s fully charged, the LED will stop flashing and stay green.
How long does a Koko take to charge?
How long does caliburn Koko take to charge?
How do I check my Koko battery?
On the side of the KOKO is a small LED battery life indicator (bottom hole) and one airflow hole. The battery indicator lights up when you draw on the mouthpiece and also flashes while charging – red, blue or green to display remaining battery life.
How do you fix a caliburn that won’t hit?
Try these three fixes.
- Press the fire button five times quickly. The most likely reason why your Caliburn isn’t hitting is because the device is locked.
- Charge the battery fully. The device won’t produce vapor if the battery is dead.
- Confirm that the pod has a good electrical connection with the device.
Why is my caliburn vape flashing blue?
When Caliburn vape blinking blue suggests that the remaining battery cost is 30-60 per cent. When Caliburn vape blinking red implies that the remaining battery fee is under 30 per cent.
What is Kokoko software?
KoKo software offers a seamless review, interpretation, and EMR interoperability. It easily produces and distributes the highest quality, ATS-compliant test results in your modern, connected practice. KoKo Decision makes all of your clinical and diagnostic respiratory data easy to access from all of your workstations.
How accurate is Koko’s PFT?
With KoKo PFT solutions, you (really) can have your cake and eat it, too. KoKo’s pulmonary function testing is accurate within <±1%, which is 50% to 300% more accurate than the competition. And with accuracy of <±3%, our spirometers are up to 67% more accurate than the competition.
How accurate are Koko’s spirometers?
And with accuracy of <±3%, our spirometers are up to 67% more accurate than the competition. KoKo’s standard plethysmography test takes just 1 minute. That’s 50%+ faster than the competition. And the Nitrogen Washout test takes just 1 minute 35 seconds, which is 2-4 times faster than the competition.
Why choose Koko connect?
From a single spirometer solution in your private practice to an enterprise solution with devices in multiple facilities, KoKo Connect interfaces with the world’s leading EMR/HIS systems in hours (not weeks!). And it does it all at a fraction of the cost of competitive systems.