What RAM does Dell R710 use?
The PowerEdge R710 is compatible with 1GB, 2GB, 4GB, 8GB, 16GB and 32GB ECC Registered (RDIMMs) Memory Modules. 64GB DIMMs are not compatible with the R710. 32GB is the largest DIMM size.
How loud is Dell R710?
Hand down, though, the R710 has more capacity and produces way less noise than the 2950 but do be warned that if you get the ambient temperature of the system board up to 86-87 degF (30-31 degC) the fans will ramp up to about 8,000 RPM and it’s about as loud as a Dell 2950.
How much power does Dell R710 use?
You can expect idle power consumption to be roughly 122.3 watts. This will cost roughly $106.42 for a full year of idling with the national average cost of $. 10/KWh. At full load you can expect power consumption of roughly 266.8 watts.
How heavy is Dell R710?
57.5 pounds
Product information
Product Dimensions | 26.8 x 17.44 x 3.4 inches |
---|---|
Item Weight | 57.5 pounds |
Manufacturer | DELL SERVERS |
ASIN | B002KDIXMM |
Item model number | 464-0542 |
How do you convert kWh to dollars?
Step Two: Calculate the Electricity Cost
- kWh = P(W) × T(h/day) ÷ 1,000(W) kWh = 9,600 W × 4 hrs ÷ 1,000. kWh = 38.4 kWh.
- Price = Electricity(kWh) × Cost(cost/kWh) Price = 38.4 kWh × $.12. Price = $4.61 per day.
- Monthly Price = $4.61 per day × 30. Monthly Price = $138.30.
How much power does Dell server?
The three Dell PowerEdge R720 servers consumed approximately 1,150 total watts. We set a dynamic limit of 850 watts and gave each server a different priority—one high, one medium, and one low.
How deep is an R710?
The Dell R710 chassis is 2 rack units in height, has a depth of 28 inches and will fit in standard EIA 19 inch racks.
When was the Dell R710 released?
2009
Description. Dell’s PowerEdge R710 server was released in 2009 and offers reduced power consumption plus Dell’s integrated systems management tools, including iDRAC6 with Lifecycle Controller.
How do you calculate electricity usage?
The first thing you need to do to calculate electricity usage is to find out how many watts of electricity each of your appliances and devices are using per day. You can do this simply by multiplying the appliance’s wattage by the number of hours it is used per day (see equation below).
How many kW is a dollar?
Convert US Dollar to Kuwaiti Dinar
USD | KWD |
---|---|
1 USD | 0.30679 KWD |
5 USD | 1.53395 KWD |
10 USD | 3.0679 KWD |
25 USD | 7.66975 KWD |
How many watts does a Dell server use?
The three Dell PowerEdge R720 servers consumed approximately 1,150 total watts.
How many memory channels can I put in my Dell R710?
RE: Dell R710 – Memory Configuration You could populate all 3 if you like, but you would need a 16GB for all the white slots, and 4GB dimms in all the black slots, that would make the 3 channels match. Your excluded from that bank due to the limited number of 16GB dimms you have. You will need to start with placing the 16gb dimms in A1 and B1.
How do I know if my R710 is hotswappable?
I have an R710 as well, and if you look at the exterior components you’ll see orange if it’s supposed to be hotswappable of not. Orange circle on the HDD release switch, orange release on power supplies etc.
Why can’t I connect to the R710 with 9 sockets?
The issue you are running into is due to the R710 needing the 3 memory channels to match. Each nine-socket set is organized into three channels with three memory sockets per channel.
How can I tell if my RAID controller is hotswappable?
Good advice from SAM about verifying RAID controllers first. I have an R710 as well, and if you look at the exterior components you’ll see orange if it’s supposed to be hotswappable of not. Orange circle on the HDD release switch, orange release on power supplies etc.