What lights should be flashing on eir modem?

The WiFi light (if using WiFi) should be GREEN and blinking.

How do I know if my eir modem is working?

Solutions

  1. Check the basics. Check your modem is turned on and you can see a solid DSL light and blinking internet light.
  2. Check all connections are secure. If you have extra equipment such as a filter, unplug these and connect your modem directly to the left-hand side of the telephone socket.

How do I reset my Eircom modem?

If you want to reset the factory settings for eir fibre box, press and hold the RESET button with a pin (like a paper clip) for 8 to 10 seconds until all the modem lights turn off, then release. Alternatively, you can perform a reset using the software interface.

Why is eir not working?

Sometimes a simple reboot of the eir fibre box can fix your problem. To do this, press the Power button located on the back of the eir fibre box and wait five seconds before pressing it again. It can take up to two minutes for the eir fibre box to be fully functional again.

How do I connect to eir WiFi?

Connecting to eir WiFi Follow these 3 steps to connect to eir WiFi: Search for available wireless networks on your device. Select ‘eir WiFi’ network from the list. When prompted enter eir WiFi Guest username and password.

Should the Internet light be flashing on my modem?

INTERNET: The internet light should never be on. ADSL: A solid green light indicates a good Internet connection. A blinking light means you are having difficulty connecting to the internet. Ensure all telephone cable connections are tight and secure and reboot the modem and router (if applicable).

Why is my Eircom broadband not working?

General Troubleshooting Steps Restart your modem and follow step 1-5 below: Turn off the modem using the On/Off switch. Unplug the power source on your modem. Wait 30 seconds and plug it back in.

Why won’t the Internet light up on my router?

There could be a few reasons for this light not working, the most common reason will be because you don’t have your ISP settings entered into the modem. Most modems that come from your ISP should be preconfigured with all your settings so it should be plug and play.

Why is my eir not working?

Restart your device. Then open the eir TV app again and see if the issue has been fixed. and the eir TV app. Remove and reinstall the eir TV app from the App Store.

How do I fix my Internet modem?

How to Fix a Modem That Won’t Connect to the Internet

  1. Check the lights on your modem.
  2. Check the power supply and coax cables.
  3. Reboot your router and modem.
  4. Check your Ethernet cables.
  5. Disconnect all connected devices.
  6. Plug your computer into your modem.
  7. Keep your modem cool.
  8. Update your modem and router’s firmware.

Why is there no Internet light on my router?

How do I Reset my Eircom D1000 modem?

You can also press the RESET button on the rear panel to reset the factory defaults of your Device. Refer to Section 1.5 on page 15 for more information on the RESET button. eircom D1000 modem User’s Guide… System restart allows you to reboot the Device remotely without turning the power off.

Does Eircom D1000 support bridging?

Its easy for Eircom to say that they do not support bridging, but the reality is that most customer want to avoid a double NAT situation. Bridging should work, and I have found a trick that makes it work – its really weird. On the D1000, to bridge the connection you turn off the Wireless, then the Firewall.

How do I set up PPPoE on the D1000?

On the D1000, to bridge the connection you turn off the Wireless, then the Firewall. Lastly, you change the mode from Router to Bridge in the Broadband setup screen. With these steps, you should then be able to configure a PPPoE session from your device, your laptop… whatever…

How do I Bridge the connection on the D1000?

On the D1000, to bridge the connection you turn off the Wireless, then the Firewall. Lastly, you change the mode from Router to Bridge in the Broadband setup screen.