What is the difference between a short and long Chevy water pump?
Due to the longer production run, long water pumps hold the distinction of having more accessory brackets, pulleys, and other hardware available for them, but obviously the short pump will save you roughly 1-3/8-inches (1.375-inch) of room, which in a cramped hot rod engine bay might be just what you need to have your …
How long is a SBC long water pump?
7 inches
Long water pumps measure from where they attach to the engine block to the pulley flange. They measure 7 inches for SB engines and 7 1/4 inches for BB engines.
How much PSI does a Chevy power steering pump have?
Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request.
Which way does water flow in small block Chevy?
water lines On a Chevy engine the front of the head runs hotter than the rear of the head because the water entering the heads at the back cylinders have to travel through the head before exiting at the front and into the water crossover on the intake.
What Chevy came with a short water pump?
Short Water Pump Used on 1969-1970 Corvettes with the 350 V8. Used on light duty trucks from 1955-1972.
What size are the water pump pulley bolts on a small block Chevy?
Product Description. Water pump alloy steel pulley nose bolts kit for Chevy small block 265-283-302-305-307-327-350-400 engines. The bolts in this kit are 5/16″-24 x 3/4″ flat head cap screw. This bolt kit is used when you remove fan and stock pulley and install an aluminum pulley nose.
Do they make an alternator bracket for a SBC short water pump passenger side?
Alan Grove Components – Alternator Bracket – SBC – Short Water Pump – Passenger Side – 213R. TIG welded bare steel alternator bracket that mounts: GM 10si, 12si or CS130 alternators that have 6:00 & 12:00 mounting ears, high and outboard on passenger side of small block Chevrolet engine. Fits short water pump only.
Can a power steering pump produce too much pressure?
Can a power steering pump have too much pressure? This is often the result of a faulty power steering pump. The pump is powered by a belt and pulley connected to the engine. If the pump malfunctions and pressure climbs too high, this can easily manifest as an overflowing power steering fluid tank.
How do I increase the pressure on my GM power steering pump?
You should see some shims under the head of the screw. You might try unscrewing it and removing one shim. One shim should raise the pump relief pressure by 100 to 200 psi. Hold the plunger in a vise that has “soft jaws” or hold it between two pieces of wood when you remove the screw.