How much horsepower does a stock 350 have?
When originally asked, how much horsepower is in a stock 350 small block is in a stock 350 small block engine have? Somewhere between 145 and 370 depending on the year. A 350 can now produce from 140 to 370 horsepower depending on the stock.
What is a Targetmaster 350?
To start with, the Targetmaster 350, was a GM crate engine. The Targetmaster 350 came out in the late 70’s, and was a brand new, made in Mexico, 4 bolt main, 350. I seem to remember the compression ratio was in the 8.0 to 8.5 range.
How much horsepower does a Goodwrench 350 have?
Power: 300 HP @5300 RPM, 356 ft. lbs. of torque @ 3700 RPM. Displacement: 350 CID, 5.7L.
How much horsepower does a stock 5.7 350 have?
The Chevy 350 engine is a 350 cubic inch (5.7-liter) small block V8 with a 4.00 and 3.48 inch bore and stroke. Depending on the year, make and model of a car, horsepower ranges from approximately 145 to more than 370.
What is a target motor?
TARGET SUBMERSIBLE MOTORS Submersibles or more commonly known as Subs are machines that are used to push liquids to desired places and heights. The unique thing about these machines is that they get submerged inside the liquid to function, hence, submersible.
How do I identify a GM crate motor?
As an alternative, the best method is to look at the serial number engraved in block on the driver’s side that is near the extended part of the deck surface that is over the bell housing. After the serial numbers, there is the date code that goes into the engine.
What’s the difference between a Vortec 350 and a regular 350?
The spark plug is located near the center of the chamber, which is designed to promote better combustion. The regular 350 head uses a 90 degree bolt angle, while the Vortec uses a 72 degree bolt angle.
How do I know what Goodwrench engine I have?
Look at the machined pad, in front of the passenger-side head. Even replacement engines will have a code there, specifying what it is.
Are target master 350’s any good?
Target master 350 are indead made in mexica but the casting are no more crack prone than any 350 block and much better than all except for the early ones which might be equal there is a little more casting flash on them but besides that they have very very good quality and make very reliable engines.
Are Target Master engines reliable?
acually I have had lots of experiance with target master engines it is true there is more casting flash but in their defence they have been some of the most reliable engines we have installed.
What are the specs of a 350 HO engine?
350 HO Engine Specifications: Displacement: 350 cubic inches Bore x Stroke: 4.00 inch x 3.48 inch Compression 9.1:1 Block: Cast iron, four-bolt intermediate mains Cylinder Head: Cast iron, 23º valve angle Valve Diameter (Intake/Exhaust): 1.94”/1.50” Chamber Volume: 64cc
What’s the difference between Targetmaster and Goodwrench?
Targetmaster and Goodwrench are the same thing, as far as I know. It seems targetmaster is american, and goodwrench is canadian? Maybe someone else can make that more clear. They also have 8.5:1 compression, and heres a wonderful picture of how they come out of the crate, yay!