How do you put a soft top on a Jeep Wrangler?

Remove the Velcro straps from the side bows at the back of your Jeep Wrangler, and open the tailgate. Lift the soft top and drop the sidebar onto the rail, sliding it forward until the latch clicks. Fold the header over toward the windshield.

How long does it take to install a Jeep soft top?

Pretty simple and straightforward install. It took me about 2 hours to install it the first time. There is a good YouTube video out there that covers it. I would echo this.

Do Jeep Wranglers come with both hard and soft tops?

Wrangler comes standard with a soft top. If you pay for a hard top (will see hard top under options on window sticker), you will get only a hard top and delete the soft top. This sounds like your situation. IF you pay for the dual top option, then you get both.

How do you install a soft top on a Jeep Wrangler?

Be careful to not crush the weather seal on top of the B-pillar between the front and rear door of the Wrangler. Now flip the hinged pieces of the surround up and insert the bolts the same way as the fronts. Tighten down both bolts. Then repeat same process for the driver side. Next you are going to attach the soft top portion.

How to install a Jeep Wrangler Sportbar top?

You can leave the protective cover and straps on until you get the top situated on the back of the Jeep, this will make it easier to move around and handle. Once the top is placed on the back remove the arm straps. Take the lower arms and place them in the sportbar brackets. Now use the two T40 bolts to fasten it in place.

How to install weather seals on a Jeep Wrangler?

How do you put a soft top on a car window?

The last thing you need to do before putting the soft top up is to release the locking mechanisms on each side that hold the top in place. Just apply a little downward pressure to the top and the locks will slide right up. Now lift the top into place. Grab the windows and slide them into place.