How do you fix a jam duplex?

“JAM DUPLEX” error appears on the LCD.

  1. Open the back output tray.
  2. Use both hands to slowly pull the jammed paper out of the fuser unit.
  3. Close the back output tray.
  4. Pull the duplex tray and paper tray out of the printer.
  5. Pull the jammed paper out of the printer.
  6. Put the duplex tray and paper tray back in the printer.

How do you fix a paper jam on a Brother printer HL 2270dw?

Clear paper jams.

  1. Open the front cover and leave the machine for at least 10 minutes to cool down.
  2. Slowly take out the drum unit and toner cartridge assembly.
  3. Close the front cover.
  4. Pull the paper tray completely out of the machine.
  5. Use both hands to slowly pull out the jammed paper.

Why does printer jam double sided?

If the paper tears when you remove it from the rollers, check the rollers and wheels for torn pieces of paper that might remain inside the printer. If pieces of paper remain in the printer, more paper jams can occur. Reach inside the printer through the ink cartridge access door, and then manually move the carriage.

Where is the duplex tray on a Brother printer?

Turn the Brother machine around to access the back cover. 2. Pull the duplex tray completely out of the machine. The duplex tray is positioned between the back cover and the paper tray with a handle in the middle.

Why is my printer constantly jamming?

If your printer keeps jamming, you should know that the most common cause of a jam is misalignment of the paper. Paper needs to load in smoothly, completely flush with the tray. Overfilling the tray is a great way to ensure you will be spending some personal time getting to know the inside of a printer.

Why does my Brother printer says paper jam when there isn’t one?

The message Paper Jam may appear on the display if the Brother machine is not feeding paper correctly, paper scraps have become stuck in the print head path, the paper is not loaded properly in the paper tray, the jam clear cover located in the back of the machine, is not installed properly or the PE Actuator is …

Where is the two sided tray on Brother printer?

The 2-sided tray is positioned below the back cover with a handle in the middle. The 2-sided tray will only slide out from the back of the machine.

Why does my Epson printer keep jamming?

This error occurs when top/bottom of paper is not detected by ASF PE Sensor or PE Sensor in the specified steps of paper loading / ejecting operation correctly. 1 Push “Start” button after the jammed paper in printer mechanism is removed.

How do I clear my printer jam?

Remove the paper following the procedure below.

  1. Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier.
  2. Open the Rear Cover.
  3. Pull the paper out slowly.
  4. Close the Rear Cover.
  5. Reload the paper, and press the RESUME/CANCEL button on the printer.

How do I use the brother machine’s automatic 2-sided (duplex) printing function?

Set up my Brother machine’s automatic 2-sided (duplex) or booklet print. When 2-sided (duplex) printing: Use A4, Letter, Legal, or Folio size paper when you use the automatic 2-sided (duplex) printing function. Make sure that the back cover is closed. If the paper is curled, straighten it and then put it back in the paper tray.

How do I fix a paper jam in my Brother machine?

Put the drum unit and toner cartridge assembly back into the machine. Please confirm that you have installed both a toner cartridge and a drum unit in the machine. If you have not installed a drum unit or have installed the drum unit improperly, then this may cause a paper jam in your Brother machine.

What to do when Jam duplex message appears on the control panel?

When the JAM DUPLEX message appears, the following LED indications is shown on the control panel. The Error LED is flashing. After you have just used the printer, some internal parts will be extremely hot. Wait at least 10 minutes for the machine to cool down. Pull the paper tray completely out of the machine.

Can the machine print on 2-sided (duplex) paper?

The machine can print in 2-sided (duplex) if the print media is 60 to 105 g/m 2 (16 to 28 lb) plain paper. Printing on print media heavier than 105 g/m 2 (28 lb) will cause smears and excessive paper curling.