How do I reset my SB6120?

Resetting the SB6120

  1. Disconnect the coaxial cable.
  2. Power cycle the unit by disconnecting the power cord for 10 seconds, then reconnect the power cord.
  3. Click the Configuration link on top.
  4. Click the Reset All Defaults button (as shown below).
  5. When asked, Do you want to proceed?, click the OK button.

How do you know your modem isn’t working?

5 Warning Signs Your Cable Modem is Dying

  1. Connection indicator lights have turned off even if you can still surf the web.
  2. Data transfers/downloads are slow.
  3. The connection speeds are slow.
  4. The modem is making a lot of loud or weird noises.
  5. The modem turns off or stops functioning.

Does a cable modem give you WiFi?

Cable modem routers allow for a physical wired connection as well as a WiFi connection for added versatility. How you configure your home network can significantly improve your Internet quality and speeds.

Why is my Motorola Surfboard not working?

If you are having troubles connecting to the internet, first try to reset the modem by unplugging the power cord from the modem and wait 1 to 2 minutes. When the modem lights come back on restart your computer or if your modem is connected to a router unplug your router for 30 seconds and plug it back in again.

How often should you replace spectrum modem?

For example, a new DOCSIS standard is usually introduced every four to seven years for cable internet. That means you should expect to replace your cable modem at least every four to seven years if you want the fastest, highest quality connection possible.

Can you replace spectrum modem?

To get the most out of your Spectrum Internet service, you can request a replacement modem online. We’ll provide you with a replacement modem and a Self-Installation Kit to guide you through the installation process.

Can I still use my old Motorola sb6120 modem?

Your Motorola SB6120 cable modem is DOCSIS or Euro-DOCSIS certified. Q If I have a cable modem, can I still use my old 28.8 Kbps or 56 Kbps modem? AYes! Although once you’ve experienced the speed of cable Internet access, you’ll never again want to wait for traditional dial-up services.

What to do if the sb6120 is not working?

Problem Possible Solution Power light is off Check that the SB6120 is properly plugged into the electrical outlet. Check that the electrical outlet is working. Cannot send or receive data On the top front panel, note the first light that is off.

What precautions should I take before installing a sb6120 cable modem?

Precautions Postpone SB6120 cable modem installation until there is no risk of a thunderstorm or lightning activity in the area. To avoid damaging the cable modem with static electricity: • Always first connect the coaxial cable to the grounded cable TV wall outlet.

How do I mount the sb6120 on the wall?

Use M3.5 x 38 mm (#6 x 11/2 inch) screws with a flat underside and maximum screw head diameter of 9.0 mm to mount the SB6120. 8. Using a screwdriver, turn each screw until part of it protrudes from the wall, as shown in the following illustration. 6.0 mm (.24 inches) maximum 9.0 mm (.35 inches) maximum 2.5 mm (.10 inches).