How do you measure for Bali cellular blinds?

Measure Width: Measure the inside width of window casing in three places. Record narrowest measurement. Measure Height: Measure the inside height from the top of window casing to top of sill in three places. Record longest measurement.

How are cellular shades measured?

How to Measure for Inside Mount Cellular Shades

Measure the depth of your window frame, from the front of the opening to the glass.
Measure the width of each window.
Measure the height of your window opening in three places: left, center, and right.
Order at the exact opening size with no deductions.

How do you measure for Honeycomb blinds?

Instructions for Inside Mounted Honeycomb/Cell Shades

To determine the width, measure from left to right on the top, middle, and the bottom. Use the smallest width out of those numbers.
If you get a 1/16” or 1/32” increment, round down to the nearest 1/8”.
This is the width you will use when ordering.

How do you measure for inside mount blinds?

Inside Mount

Measure the width inside the window opening at the top, and round down to the nearest 1/8″ measurement.
Measure the height inside the window opening from the top of the window opening to the window sill.
Do not take any allowances on the height or width.

How do you measure the depth of inside mount blinds?

It’s super easy to measure. Measure using a steel tape measure down to the nearest 1/8th inch. Extend the tape measure into the window as far back as it can go at the top of the window where the brackets will be installed. Be sure to check the rest of the window opening for window cranks or handles.

What is the difference between cellular shades and honeycomb shades?

A cellular shade has a more complex construction. Also called “honeycomb shades,” cellular shades have geometric folds that resemble honeycombs. Cellular window shades are available with both a single layer of these honeycombs and a double layer, called “single cell” and “double cell,” respectively.