How do I reprogram my directv remote?

Press MENU on your remote. Select Settings > Remote Control > Program Remote. Select the device you wish to control with the remote. Follow the on-screen prompts to complete programming.

How do I reset my black directv remote?

How do I reset my remote? To reset DIRECTV remotes to their default factory settings, press and hold the MUTE and SELECT buttons until the remote’s light flashes three times. Then, enter 981 and press SELECT. The remote will flash four times to let you know it has been reset.

How do I program my directv remote to black and white?

4 Steps to Pairing Your Universal Remote With an HD Source

  1. Point the remote at your receiver and press MENU on the remote.
  2. Use the arrow button to highlight and select SETTINGS & HELP > SETTINGS > REMOTE CONTROL > PROGRAM REMOTE.
  3. Choose the device you want to pair.
  4. Follow the on-screen steps to complete the programming.

Why won’t my DIRECTV remote pair with my TV?

Step 1: Check or replace the batteries A lot of problems with remotes have to do with dead or dying batteries. Even though DIRECTV Genies should tell you on screen if the remote battery is low, sometimes that doesn’t happen. Open the back hatch on your remote and put in a pair of fresh batteries.

How do I pair my directv remote with my DIRECTV receiver?

Make sure your remote is paired with your receiver.

  1. Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.
  2. Press and hold MUTE and ENTER at the same time on your remote.
  3. The screen displays Applying IR/RF Setup. The remote is synced.

How do you program a remote to a TV?

Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on, and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

How do I setup my directv RF remote?

Here are the steps.

  1. Slide the MODE switch to the DIRECTV position.
  2. Press and hold the MUTE and SELECT keys until the green light under the DIRECTV position flashes twice.
  3. Using the number keys enter 961 then press CHAN UP.
  4. Using the number keys enter 347379 then press SELECT.

How do I program My DirecTV remote to my TV?

Press MENU on your remote. Select Settings > Remote Control > Program Remote. Select the device you wish to control with the remote. Follow the on-screen prompts to complete programming. Heads up: The DIRECTV remote powers on your TV and controls the volume while watching DIRECTV.

What does the DirecTV remote control do?

Heads up: The DIRECTV remote powers on your TV and controls the volume while watching DIRECTV. To adjust TV settings or access third-party apps, use the remote control that came with your TV.

How do I program My DirecTV remote to my Genie Mini?

Program a DIRECTV Genie remote manually Point the Genie remote at your Genie HD DVR, Genie Mini, or Wireless Genie Mini. While aiming the remote at your device, hold down the Mute and Select buttons. Let go when the remote’s green light blinks twice.

How many devices can a DirecTV remote control control?

We’ll start with the universal remote. Your DIRECTV universal remote control can control up to four devices, including DVD/Blu-ray players, DVRs, gaming consoles, soundbars, and TVs. Here’s how to program your remote for both SD and HD receivers and how to change your TV’s input source.