How do you reset the drum on a brother mfc 7460DN?

How to reset the drum counter:

  1. Make sure the printer is on, then open the front cover and push “clear” button.
  2. Press “1” to confirm you are installing a new drum.
  3. When the screen says “Accepted”, close the front cover and you can now start printing!

How do I reset the drum on my Brother MFC printer?

Reset the Drum Counter

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press. (Settings).
  4. Press All Settings. (This step might be skipped in some models.)
  5. Choose Machine Info. or Machine Information => Parts Life.
  6. Press and hold Drum or Drum Life until the machine’s display message changes.
  7. Press Yes.
  8. Press.

Why does my Brother printer keep saying replace drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do you reset the drum on a brother mfc 7360N?

BROTHER MFC-7360N/MFC-7362N Open the machines front door where you would replace the cartridges. On the top panel you will see a “clear/back” button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.

How do I reset my brother mfc 7360N?

Reset the network settings to the factory default (video instructions available)

  1. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
  2. Press Menu.
  3. Press the Up or Down arrow key to choose Network Reset, and then press OK.
  4. The machine will re-start.

How do I reset my Brother MFC L2710DW drum?

Reset Drum for Brother MFC-L2710DW

  1. Make sure the machine is turned on.
  2. Close the front cover.
  3. Press OK and the Up arrow key at the same time.
  4. Press OK to select Drum.
  5. Press the Up arrow key to reset the drum counter.

How do you reset the drum counter on a Brother MFC L3770CDW?

Reset the Drum Counter (MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW)

  1. Make sure the machine is turned on.
  2. Press and hold for about five seconds.
  3. Press [Drum].
  4. Select the toner color for the drum unit you just replaced.
  5. Press [Yes].

How do you reset the drum counter on a Brother MFC L2710DW?

How to reset the drum counter:

  1. The printer should be on.
  2. Close the front of the printer.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Press the “up” arrow to reset the counter.

How do you reset the drum life on a Brother MFC 7340?

Brother MFC-7340 Toner Reset

  1. With your printer ON, open the front door (cover)
  2. Press Clear/Back Button once.
  3. Press *00 (*zero zero)
  4. The message on the display should now read Accepted.
  5. Close the front cover.
  6. Your toner is now reset.