How do I change the RCN settings on my router?

How do I change the RCN settings on my router?

How to change your modem’s settings

1. Install the Cisco Connect software provided with your RCN modem or router.
2. Open Cisco Connect.
3. Click “change” underneath Router Settings.
4. Next, click “change” in the Personalize section.
5. A warning appears on the screen.
6. Enter the new router name (SSID) and password.

How do I set up my RCN modem?

1. Connect the power cord to the back of the modem and plug the modem into an electrical outlet.
2. Turn o your computer.
3. Connect the Ethernet cable into the back of the modem in the Ethernet port.
4. Turn on the computer.
5. Locate the RCN packing slip.
6. Unplug the modem and turn o your computer.
7. Plug in the modem.

Can I use any router with RCN?

RCN is currently charging $10 per month to rent their 1 gig modem and Wi-Fi router plus an initial installation fee. Fortunately, RCN does let you use any DOCSIS 3.0/3.1 modem with their plans, making saving money on your cable bill easy!

What type of router does RCN use?

Full Astound Broadband Powered by RCN Approved Modem List

Is RCN a dynamic IP?

RCN provides customers with one Dynamic IP address with the customers’ cable modem service.

How do I reset my RCN WiFi?

Steps to restart your modem:

1. Shut down any computers or disconnect the power from the router.
2. Unplug the cable modems power cable from the electrical outlet on the wall, not from the back of the modem (if possible).
3. Wait about 60 seconds.
4. Plug the power cable back in to the wall outlet.

How do I install my own modem?

Step 1: Connect Modem

1. Step 1: Connect Modem. Connect one end of the coax cable to a cable outlet, then connect the other end to the modem.
2. Connect the power cable to the modem, then plug the other end into an electrical outlet.
3. Step 2: Connect Modem to Computer or WiFi Router.
4. Step 3: Activate Modem Online.

Do you need a modem and a router?

Routers and modems have traditionally been two separate devices that worked together to form your home network. However, with today’s technology, you don’t need a separate modem and separate router necessarily, as new combination modem and router units merge the two devices’ functions into one powerful gadget.

What is network reconfiguration (RCN)?

Network Reconfiguration: Adding network capacity can mean the addition, or the relocation of customers from one “chassis” to another. There are occasions when RCN will replace smaller network blocks. If a customer is on a block that is removed, their IP address will change.

How many static IPs does RCN provide?

The Static IP is available immediately after the modem goes online. How many dynamic IPs does RCN provide? RCN provides customers with one Dynamic IP address with the customers’ cable modem service. Additional Dynamic IPs can be purchased separately. How many email messages can the customer send per hour with a Static IP?

Are customers allowed to attach web servers to the RCN network?

Are customers allowed to attach Web servers or e-mail servers to the RCN network via a Static IP? Yes. At this time, customers are allowed to attach a Web server or e-mail server to the RCN network. Customers with Dynamic IP addresses are NOT permitted to host servers. How many Static IPs may the customer have?

How to set up a modem with RCN?

This is a short description of how to set up a modem with RCN. Pick a good location with good air circulation. Follow the set-up manual that comes with the device. Call RCN and give them the device’s MAC address and, they will activate it. Click here for a more complete guide.