How do I print a test page on my Brother printer?

Print a Test page

  1. Make sure that the front cover is closed and the power cord is plugged in.
  2. Turn on the printer and wait until the printer is in the Ready state.
  3. Press any of the Menu buttons (+, -, OK or Back) to take the printer off line.
  4. Press + or – to choose “Machine Info”.
  5. Press + or – to choose “Test Print”.

How do I print a test page on a Brother HL 5450dn?

NOTE: The screens may differ depending on operating system being used and your Brother machine.

  1. Open Printer Properties. (Click here to see how to open Printer Properties.)
  2. Open the General tab and click the Print Test Page. The test page will be printed.

Why won’t my Brother printer print a test page?

The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver. There are several basic troubleshooting steps you can take to resolve this issue.

How do I print a network configuration page on a Brother HL 5450dn?

Using the control panel button:

  1. Make sure that the front cover is closed and the power cord is plugged in.
  2. Turn on the machine and wait until the machine is in the Ready mode.
  3. Press Go three times within 2 seconds. The machine will print the current printer settings page.

How do I change the IP address on my Brother HL 2270dw?

To change the IP address information, double click the printer you wish to change and enter the print server password (refer to the print server userguide for information on passwords). Select the ‘TCP/IP’ tab and enter the new IP address information.

How can I tell how many prints my Brother printer has?

To check the page counters (total, faxes and reports, copies, and printed pages) on the machine LCD display:

  1. Press MENU, 6 (Machine Info), 2 (Page Counter).
  2. Use the UP OR DOWN ARROW key to view the number of pages for: Total: Summary of all printed pages.
  3. Press OK.
  4. Press STOP/EXIT.

How do you create a test page?

  1. Click on the Windows Start Button.
  2. Select Control Panel.
  3. Select Devices and Printers.
  4. Right click on the printer and select Printer Properties.
  5. Click Print a Test Page.
  6. After the Test Page has printed click OK.