How do I connect my Dlink camera to an IP address?
Step 1: On your smartphone or tablet, make sure you turn on Bluetooth and connect via Wi-Fi to the wireless router you want to connect the camera to. Step 2: Launch the mydlink Lite app on your device. Step 3: Tap Add a New Camera. Step 4: On the QR Code Setup screen, tap Yes.
How do I reset my D Link DCS-930L?
To reset your DCS-930L camera, please use an unfolded paperclip to press and hold the RESET button for at least 3 seconds while your camera is plugged in.
How do I access my D-Link camera on my computer?
Using mydlink Web Portal:
- Step 1: Log in to your mydlink account at http://eu.mydlink.com.
- Step 2: Select the DCS-2330L from the list of devices on the left-hand side to view the live video from your camera.
- mydlink Lite App:
Why is my D-Link not working?
If Disconnected- please try the steps below: – Power Off your Internet Modem (Not the D-Link Router) for 20 seconds and then power it back on. Wait up to 2 minutes and check the Network Status again. If the status changes to Connected, your internet should be working.
Why is my D-Link camera not connecting to WIFI?
If your camera is still not working, please Reset the camera and run the install setup again. To reset the camera, use a paper clip and then press and hold the reset button for 10 seconds and release.
Why is my Dlink camera not connecting to WIFI?
How do I set up my dcs-930l with mydlink?
This type of setup allows you to set up your camera by simply plugging it in and connecting it to your router. Connect your camera to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your DCS-930L and add the camera to your mydlink account.
Does the dcs-930l come with D-Link D-ViewCam software?
For advanced users that want more out of their camera, the DCS-930L also comes with D-Link D-ViewCam™ management software for Windows PCs.
How do I enable DDNS on my D-Link Camera?
DDNS allows you to access your camera using a domain name instead of an IP address. To do this, you will need to have an account with one of the DDNS services listed in the drop-down box on this page. D-Link DCS-930L User Manual 29 Section 3 – Configuration Image Setup Select this box to enable anti flicker.
What is the default FTP port for the dcs-930l?
D-Link DCS-930L User Manual36 Section 3 – Configuration FTP Host Name: Port: User Name: Password: Path: Passive Mode: This is the IP address of the FTP server that you will be connecting to. Default is port 21. If changed, external FTP client program must change the server connection port accordingly.