What size tractor does a John Deere 148 loader fit?
The specifications page clearly says: “Mount 148 Loader on John Deere 2520, 3020, 4000, 4020, 4020, 4230, 4320, and 4430 Tractors.” “Mount 158 loader on John Deere 4000, 4020, 4230, 4430, 4520, 4620, and 4630 Tractors.” The fact either fits a 4020 says width is not the problem but length of tractor probably is a …
How much does a John Deere 148 loader weigh?
1350 lbs
John Deere 4020 Attachments
| John Deere 148 Loader | |
|---|---|
| Loader weight: | 1350 lbs 612 kg |
| Breakout force (lift): | 4700 lbs 2131 kg |
| Lift to full height (at pin): | 3100 lbs 1406 kg |
| Bucket capacity: | 0.5 cu yd 0.4 cu m |
What does a John Deere 146 loader fit?
The 146 loader was designed for 4 cylinder utility tractors ( 2020, 2030, 2440, 2630 etc) with straight front axles. Too much loader for 3 cylinder tractors with swept back front axles. 148 loader has similar capacity as the 146 but is designed for row crop tractors.
How much does it cost to put a loader on a tractor?
This is a very inexpensive way to get the most out of your tractor. Front end loaders cost about $7,000.00. You can buy the Scissor Lift/Jack for $420.00 and the adapters for only $599.00. Front end loaders can cost you nearly ELEVEN times more than any of these two attachments would.
How much does a John Deere 146 loader weigh?
1250 lbs
John Deere 2350 Attachments
| John Deere 146 Loader | |
|---|---|
| For use on two-wheel drive tractors. | |
| Loader weight: | 1250 lbs 567 kg |
| Height (to pin): | 119 inches 302 cm |
| Clearance, dumped bucket: | 93 inches 236 cm |
How much does a John Deere front end loader weight?
Loader
| Base weight | 306.4 kg |
|---|---|
| Leveling configuration | |
| Bucket used | Materials – 1550 mm |
| Bucket weight | 93 kg 205 lb |
| Lift capacity at full height | Measured at pivot (U) 539 kg 1186 lb Measured at 500 mm ahead of pivot (V) 384 kg 845 lb |
What loader fits a John Deere 6400?
John Deere 640NSL Loader
John Deere 6400 Attachments
| John Deere 640NSL Loader | |
|---|---|
| Height (to pin): | 139 inches 353 cm |
| Breakout force (lift): | 4,575 lbs 2075 kg |
| Lift to full height (at pin): | 2,970 lbs 1347 kg |
| Bucket width: | 61 inches 154 cm |