How much does it cost to epoxy a coaster?
about 3 oz
To make one coaster, you will need about 3 oz of epoxy. Wear gloves to protect your hands, and pour equal amounts of resin and hardener into a mixing cup. Use a stirring stick and mix the resin well for 2 minutes.
How do you make epoxy resin coasters?
Mix the Epoxy Resin For one resin coaster, mix 2 oz. of product in a 1:1 ratio of hardener and resin. Split evenly into three cups. In one cup, add a pinch of a blue glitter, in the second, add a pinch of a different blue glitter, in the third, a pinch of another blue glitter.
Which resin to use for coasters?
Epoxy resin
Epoxy resin is generally used for coasters thanks to its durability and clarity. Try to use a resin that is heat resistant and UV protected to avoid yellowing.
Can you put hot drinks on resin coasters?
When using the normal epoxy resin, it can only withstand up to 150 °/300° F (65.5°C/148°C) for a short time, before it begins to warp or distort. So, when it comes to a resin coaster, hot coffee cups are not a good idea.
How much does it cost to make resin coasters?
The silicone coaster molds were $9. The Resin kit was $33 and the dried flowers were $13. In total, the coasters cost me $55 to make but I have enough materials to make 2- 3 more sets, so to make one coaster it will cost $4.58.
Can you use resin coasters for hot drinks?
In general, coasters made from epoxy resin can handle the heat of a warm mug, but can’t handle one that is directly from the microwave. If you want a resin that is more heat tolerant, I would recommend using a polyester resin.
Can you put coffee cups on resin coasters?
Usage of Resin Coasters for hot Beverages When using the normal epoxy resin, it can only withstand up to 150 °/300° F (65.5°C/148°C) for a short time, before it begins to warp or distort. So, when it comes to a resin coaster, hot coffee cups are not a good idea.
Can you use a hair dryer for resin?
There are other methods, including poking with a pin or blowing through a straw, but these are slow and ineffective. A hair dryer or heat gun doesn’t get hot enough to remove bubbles efficiently and can blow dust all over your wet resin.