What does TTS mean in diving?

Time To Surface For example, Time-to-Surface (TTS) is the predicted time to ascend to the surface plus all deco stops. It assumes the diver will ascend at 33ft/min (10m/min) and use the best gas available at all depths.

What is your trim in diving?

The trim of a diver is the orientation of the body in the water, determined by posture and the distribution of weight and volume along the body and equipment, as well as by any other forces acting on the diver.

What is the limit for divers?

A recreational diving limit of 130 feet can be traced back decades. The deepest your typical recreational scuba diver can go is 130 feet. In order to venture further and explore wrecks, caves and other sites beyond 130 feet, these agencies — such as PADI, NAUI and SSI — require “technical” certifications.

What does Deco mean in diving?

Decompression diving
Decompression diving is when a diver is required to make one or more stops during their ascent to give their body time to safely release the nitrogen (or other gas, such as helium) that dissolved into their tissues during the dive.

What is GTR on dive computer?

GTR gives you an added accurate parameter to your dive limits (along with the no decompression limit) by letting you know exactly how long you have left at a given depth before a direct ascent to the surface (at a rate of 10m/33ft per minute) is required.

What is meant by neutral buoyancy?

Neutral buoyancy occurs when an object’s average density is equal to the density of the fluid in which it is immersed, resulting in the buoyant force balancing the force of gravity that would otherwise cause the object to sink (if the body’s density is greater than the density of the fluid in which it is immersed) or …

Where do you put weights when diving?

He added: “For drysuit diving, weights are best positioned at the hips, not above the waist to give the balanced profile/trim. For wetsuit diving, weights are generally best distributed above the hips.”

Can I dive in 40 meters?

In Recreational diving, the maximum depth limit is 40 meters (130 feet). In technical diving, a dive deeper than 60 meters (200 feet) is described as a deep dive. However, as defined by most recreational diving agencies, a deep dive allows you to descend to 18 meters and beyond.

Why do divers tap their head?

These surface communication signals involve the whole arm so that boat captains and surface support staff can easily understand a diver’s communication from far away. The “OK” sign is made by joining both arms in a ring above the head, or if only one arm is free, by touching the top of the head with the fingertips.

How to prevent text from flowing out of a Div?

You can use the word-wrap property to cause the text to break: It has fairly good browser support, too. See documentation about it here. Show activity on this post. It will prevent text from flowing out of the div.

What happens if the text exceeds the width of the Div?

which exceeds the width of the div, the text would not be cut off and would be displayed beyond the div at the same line. Show activity on this post. in CSS (or hard-code the style, but CSS is cleaner).

How do I break the text in a Div?

You can use the word-wrap property to cause the text to break: It has fairly good browser support, too. See documentation about it here. Show activity on this post. It will prevent text from flowing out of the div. It will break the text as it reaches the end of the div.

Is there a way to cut off the text from the text?

Here’s a potential solution ( heavily inspired by the following Compass mixin ): If you want to actually cut off the text in certain situations (i.e. long words with no spaces) but wrap the text in other situations (i.e many words with spaces), then that’ll be a quite a bit more involved.