What size is a Dunlop MU85B16?
What size is a MU 85 16? MT90b-16 is a 130/90-16.
What does 77H mean on a motorcycle tire?
The numbers (77) represent the load carrying capacity of the tire. In this case, 77 means 908 pounds. A typical load rating chart shows 47 or 386 lbs all the way up to 87 or 1,202 lbs. The letters (H) represent the speed rating of the tire. In this case, H means a top speed of 130 miles per hour.
What size is a Dunlop mt90b16?
130/90-16
Enhance your purchase
| Size | 130/90-16 |
|---|---|
| Brand | Dunlop |
| Load Index Rating | 72.00 |
| Rim Size | 16 Inches |
| Speed Rating | H |
How wide is a Dunlop D402?
Rear.
What is the difference between MT90B16 and MU85B16?
90 means the height is 90% of the width and the 85 is 85% of the width, so MT90 would be 130mm wide and 117 mm high, MU90 would be 140mm wide and 126mm high, MT85 would be 130mm wide and 110mm high, MU85 would be 140mm wide and 119mm high.
How wide is a 180 tire?
So, because there’s an allowable tolerance on the nominal width, a 180 labeled tire can measure 170 mm or 190 mm. The manufacturers are given quite a bit of wiggle room in their labeling versus their measurements. So, don’t get hung up on the 180 vs. 190 label.
What size is a MT90 16 tire?
MT90b-16 is a 130/90-16.
What size is a D402?
24 x 24 x 6 inches
Compare with similar items
| This item Dunlop 302191 D402 Harley-Davidson Front Tire – MT90B16 SW, Speed Rating: H, Tire Type: Street, Tire Construction: Bias, Position: Front, Tire Size: MT90-16, Rim Size: 16, Load Rating: 72, Tire Applic | |
|---|---|
| Price | $17793 |
| Sold By | Chrome World |
| Item Dimensions | 24 x 24 x 6 inches |
| Size | MT90H-16 |
What is a D402 tire?
The D402 is an approved Harley-Davidson touring tire. Built with a three-ply polyester casing with two fiberglass belts, the D402 helps provide stability for touring riding.
What does the B stand for in MT90B16?
MT, MH, MJ etc = Tire Width, 90 = Tire Profile, B = Rim Diameter.
What does the B stand for on motorcycle tires?
bias-belted
This is identifying the manner in which the tire was constructed, radial, bias belted, or standard bias/cross ply. Obviously, “R” stands for radial and the “B” stands for bias-belted. If there is no letter between the aspect ratio and rim size that means the tire is just a standard bias ply tire/cross ply tire.
https://www.youtube.com/watch?v=XGniOOUkmbk