What is on page connector in Multisim?

Input or output connector for hierarchical blocks and subcircuits. Off-Page. Use in flat multi-sheet design to connect pages that are at the same level, that is, not nested. On-Page. Use to connect to other nets on the same sheet without additional wires.

How do I use off-page connector in Multisim?

Multisim Help

  1. Select Place»Multi-page.
  2. Enter the desired name and click OK.
  3. Place components and wire the circuit as desired.
  4. Select Place»Connectors»Off-page connector.
  5. Drag the “ghost” image to the desired location and click to place the connector.

Where is the connector Multisim?

Multisim 14.2 Help Select Place»Connectors»Global connector and click to place the connector in the desired location. The Global Connector dialog box displays. Enter a Connector name. Select a connector from the Available connectors list.

What does a connector do in Multisim?

Connectors can greatly reduce the visual complexity of a design by reducing the number of wires that appear on the schematic. An invisible net segment is implied between a connector and any connector with the same name.

How do I use off page connector?

To use off-page connectors to connect line segments in two drawings

  1. Right-click the off-page connector.
  2. In the Create Connection dialog box, click the drawing that contains the line you want to continue on or from.
  3. Click the row that contains the off-page connector to which you want to connect.

How do I connect two wires to Multisim?

Multisim 14.2 Help Select Place»Wire. Right-click on the workspace and select Place on schematic»Wire from the context menu that appears. Click to place a junction on the workspace and then move the mouse to route the wire as desired. Click as desired to lock the wire to a specific point on the workspace.

How do I connect components to Multisim?

Multisim Help

  1. Select Place»Wire.
  2. Click to place a junction on the workspace and then move the mouse to route the wire as desired.
  3. Click as desired to lock the wire to a specific point on the workspace.
  4. Double-click to place a junction in “mid-air” and end the wire placement.

How do I add terminals to Multisim?

Multisim Help

  1. Build the following design in Multisim:
  2. Select View»LabVIEW Co-simulation terminals.
  3. Click the Terminal button in the LabVIEW Co-simulation Terminal View and select Voltage input terminal from the list that appears.
  4. Place the terminal on the wire that is connected to the left side of R1 .

What is the difference between on page connector and off page connector?

On-page Connector Symbol are pairs of on-page connecter are used to replace long lines on a flowchart page. 9. Off-page Connector Symbol: An off-page connector is used when the target is on another page. Read our flowchart connector guide for more information on how on-page and off-page connectors work.

What is on page connector and off page connector?

Shows relationships between different shapes. On-page Connector. Connects two or more parts of a flowchart, which are on the same page. Off-page Connector. Connects two parts of a flowchart which are spread over different pages.

What type of wiring mode does Multisim use?

Multisim 14.2 Help This method lets you use automatic wiring for most connections, and use manual wiring only for difficult, critical or sensitive paths.

How do I add a line in Multisim?

Click to draw a line. The cursor changes to a crosshair. Place the crosshair where you wish to start the line and click and hold the mouse button. Drag the crosshair to where you wish to end the line and release the mouse button.

What are the new connectors in Multisim?

Innovative new features now include new connectors that will make net naming and connection clearer to improve design communication. The following tutorial will provide you with a quick introduction to using the connectors in Multisim.

How do I use the on-page connector?

The on-page connector allows you to create a virtual connection between nets on a single-page, but does not exist outside of the page it is placed upon. It is therefore a “local” connector. Select Place > Connectors > On-Page Connector Connect the On-Page connector to the 12V supply (V7 on the diagram).

What’s new in Multisim 11?

In Multisim 11.0, the schematic capture environment has been completely re-architected, allowing for the quick creation of circuit diagrams that are easy to read. Innovative new features now include new connectors that will make net naming and connection clearer to improve design communication.

How do I connect the U2 op-amp to the global page connector?

Name the connector V_NEG. Click on the OK button. Press “CTRL” and “R” on your keyboard twice to rotate the connector 180 degrees. Connect the Global Page connector to the U2 Op-Amp on the wire connected to the #4 pin. This time select the name “V_NEG” from the list of the connectors in the “On-Page Connection” dialog box. Click on the OK button.