What is default password for cisco access point?

What is default password for cisco access point?

Cisco
The default password is Cisco.

How do I reset my cisco wap121 router?

To restore the device to the factory default settings, with the power on, press-and-hold the Reset button with a bent paperclip for more than 10 seconds.

How do I reset my cisco access point password?

1. Press and hold the MODE button while you reconnect power to the AP. 2. Hold the MODE button until the Status LED turns amber (approximately one to two seconds), and release the button.

How do I factory reset my Cisco access point?

Reset Cisco Wireless AP to factory defaults

1. Connect the console cable.
2. Unplug the power or network cable if connected to a POE switch.
3. Press and hold the Mode button.
4. Plug the power back into the AP.
5. Wait until the output on the console says button is pressed.

How do I reset my cisco AP to factory settings?

What is the default IP for cisco wap4410n?

What is the default IP for Cisco wap4410n?

How do I find my Cisco AP IP address?

To find the Access Point’s IP address

1. Open utility window, make sure Get IP addr is selected in the Function box.
2. Type the Access Point’s MAC address in the Device MAC ID field.
3. Click Get IP Address.
4. Write down the Access Point’s IP address that appears in the IP Address field.

How do I set the time on my Cisco wap121/wap321?

Using the Access Point Setup Wizard Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 10 1 STEP 6Select your time zone, and then set the system time manually or set up the WAP device to get its time from an NTP server. For a description of these options, see Time Settings. STEP 7Click Next.

How do I log in to my Cisco WAP device?

For more information, go to cisco.com and enter www.cisco.com/ go/findit. • For further instructions on how to locate the IP address of your WAP device, see the WAP device Quick Start Guide. STEP 2Enter the user name and password. The factory default user name is cisco and the default password is cisco. STEP 3Click Log In.

What are the ports on a Cisco wap121?

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 127 7 0 to 1023—Well-Known Ports 1024 to 49151—Registered Ports 49152 to 65535—Dynamic and/or Private Ports • Destination Port —Includes a destination port in the match condition for the rule.

What is the wap121 and wap321 wireless access point?

Instance Configuration Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 146 9 – RADIUS—The WAP device uses a database on a remote RADIUS server to authenticate users.