How do I login to Buffalo?
Buffalo Router Login
- Connect router cable to your Laptop or Computer. Alternatively use your wireless network.
- Open your web browser of choice and type IP address of your Buffalo router in the address bar.
- Now enter the default username and password of your router by accessing the admin panel.
How do I find my DD-WRT password?
Open your Internet browser (Firefox, Opera, Internet Explorer) and type http://192.168.1.1 in your address bar. You will be prompted for a username and password. Type in “root” for the username and “admin” for the password.
How do I reset my Buffalo LinkStation to factory settings?
The LinkStation will be restored to its factory default settings….Saved data is not erased.
- In Settings, navigate to [System] – [Restore/Erase].
- Click [Restore LinkStation].
- The “Confirm Operation” screen will open. Enter the displayed number within 60 seconds, then click [Apply].
How do I reset Buffalo TeraStation to factory defaults?
To reset the TeraStation to its factory default settings, power on the unit and hold down the reset button for five seconds. In the Web Admin interface, you can initialize almost all settings, including things that are not initialized from the reset button without the data saved in the TeraStation.
How do I configure the Buffalo AirStation?
Select [Start] – [All Programs] – [BUFFALO] – [AirStation Utility] – [BUFFALO AirStation Configuration Tool]. Click [Next]. Select the AirStation that you want to configure, then click [Next]. Enter the username and password, then click [OK].
How do I log in to the Airstation?
Logging in : Enter the username and password, then click [OK]. For Username and Password refer to administrator Card if it was included with the AirStation. You should connect your PC to the AirStation by wireless or wired to access the web-based configuration interface.
What is the default IP address of the Airstation?
If Router LED is off or no router LED, the AirStation is in Bridge Mode and the default IP is 192.168.11.100. Note: If the AirStation is in bridge mode and there is no DHCP connected to PC, assign a static IP address to PC. Logging in : Enter the username and password, then click [OK].
What should I do if AirStation configuration tool is not installed?
If the AirStation Configuration Tool is not installed, install it with the Setup CD. Disable the security software temporarily. *The Personal firewall has been removed since Trend Micro Titanium 2011.