How do I reset my Etekcity scale?

Table of Contents

– Place scale on flat solid surface, and try to stand on the center of weighing platform. – Remove batteries for 45 seconds (allows scale to reset). Or To manually calibrate it, you should step on the scale then step off and wait for the LCD screen to display ‘0.0’. Finally, the calibration is complete.

Why is my Etekcity scale not working?

If the scale fails to turn on, check whether the batteries are installed correctly. Replace the batteries if necessary. If an error appears on the display or if the scale does not turn off automatically, remove the batteries for 3 seconds, then reinstall them.

How accurate is Etekcity scale?

For objects less than 22 pounds, it’s accurate to 0.05lb, or 0.02kg. It’s capable of accurate measurements as low as 3.5 ounces (100 grams). This makes it suitable as a kitchen scale, as long as you don’t need to make any tiny measurements. Moreover, the scale is self-calibrating.

What app goes with Etekcity scale?

How To Link to your Etekcity scale: You can link your MyFitnessPal account to an Etekcity scale through the VeSync app that is already linked with your scale. The linking instructions are the same on both Android and iOS platforms.

How do I clean my Etekcity scale?

Clean the scale with a damp cloth and avoid getting water or any other liquid inside the scale. DO NOT use chemical or abrasive cleaning agents to clean the scale. Keep the scale in a cool environment with dry air. Always keep the scale in a horizontal position; do not store vertically.

How do you calibrate a digital weighing scale?

To calibrate a digital scale, set it on a flat surface and choose a weight. Turn the scale on and go into calibration mode. Put the weight on the scale and wait for it to calculate the total weight. If the weight is off, hit the calibration button and wait for it to recalibrate.

How do I reset my Weight Gurus smart scale?

First, Press-Awake the scale on, then press and hold SET. Now, select the user to delete and press SET. Once selected, press and hold SET once again while at the same time tapping the up key repeatedly until CLR appears. The user is now removed.

How do I change my Etekcity scale from kg to lbs?

To convert weight units: 1) Apply pressure onto the weighing platform to activate the scale. 2) Press the unit conversion button on the back of the scale to convert units (lbs to kgs, or its to lbs.