How do you sync a propel remote control helicopter?
Turn ON your remote control. The controller power indicator will light on. Now pull the trigger all the way down then up. The white LED head light of the helicopter will stary solid indicating that the helicopter and remote control are synced.
Why does my RC helicopter keep spinning?
The tail rotor is there to counteract the torque effect that the main rotor creates. A gyroscopic controller is used to coordinate the main and tail rotors so the helicopter can fly straight. When this system is not working correctly the helicopter will spin in circles.
What is channel selector in RC helicopter?
One channel controls the speed of the main rotor/throttle (lift). The second channel controls the speed or pitch of the tail rotor to turn the heli left or right (yaw). Third Channel for forward/backward cyclic (pitch). Fourth Channel for left/right cyclic (roll).
How do I sync my remote to my propel drone?
To sync it you basically need to turn off the power of the drone and controller. Wait for a minute and then select the remote control settings and link it. Hold the functions button until the light starts flickering. After about 3 seconds the light will turn green and your devices will be synced.
What tools do I need to repair my model helicopter?
Can effectively protect your model helicopter will not be hurt, to minimize the loss. 31-IN-1: A shape, cross, hexagon, Most models you need. It’s a very useful tool for your helicopter and other toys. 1 small cross screwdriver was used to repair the small screws such as the mini rc helicopter.
How to repair RC helicopter with LED light?
It’s a very useful tool for your helicopter and other toys. 1 small cross screwdriver was used to repair the small screws such as the mini rc helicopter. 1 big cross screwdriver was used to repair the medium and the larger helicopter. When the voltage is below the set value, it will buzzer with red LED light, pre-set value 3.3V.
How to repair the medium and the larger helicopter?
1 big cross screwdriver was used to repair the medium and the larger helicopter. When the voltage is below the set value, it will buzzer with red LED light, pre-set value 3.3V. Push key which can change the voltage settings and save. Voltage detection precision: 0.01V. Unit voltage display range: 0.5V-4.5V. Total voltage display range: 0.5V-36V.